[23.6 x118 (60x300cm)]
[29.5 x118 (75x300cm)]
[17.7 x78.7 (45x200cm)]
VELIMAX Lattice Diamond Window Film is designed to give a traditional and classic style to your windows and doors, whether for privacy, to block out an unsightly view or for decorative purposes.
Besides prevent UV rays, it can also cut out a large proportion of the unwanted glare, whilst still allowing natural light to pass through. It will work on any smooth glass surface and can be used anywhere in the home, requires no additional cleaning and can be installed at a fraction of the cost.
Removable and reusable. Its a static cling window film which works on any smooth glass surface. Its easy to apply and remove without residue left.
The glass film blocks UV rays by 99% UVB rays whilst still letting natural light coming through. It reduces the fading and aging of the furnishings.
Featuring a timeless architectural style, crisp black lattice design with clear frosted background lets in loads of beautiful sunlight.
Suitable for all kinds of windows, shower doors, cabinets fronts, sidelights and clear residential windows and removable storm windows.
Let a lot of light to go through create a relaxing atmosphere to your home.
This privacy window film misshapes the view and limits the clearness of the glass.
Besides prevent UV rays, it can also cut out a large proportion of the unwanted glare.
Measure Glass→Clean Glass→Cut Film→Remove Liner→Spray Water→Hang Film→Squeegee Film→Trim Edges
Black Lattice Window Film | Pure Lattice Window Film | White Lattice Window film | Lattice Black Window Tint | Solar Lattice Window Film | |
Pattern
| Black Lattice | Pure Lattice | White Lattice | Black Frosted Lattice | Silver Frosted Lattice |
Privacy Level
| 90% | 80% | 90% | 100% | 80% |
Non Adhesive
| ✔ | ✔ | ✔ | ✔ | ✔ |
Reusable
| ✔ | ✔ | ✔ | ✔ | ✔ |
Anti-UV
| ✔ | ✔ | ✔ | ✔ | ✔ |
How to remove the air bubbles?
Use a plastic card to squeegee air bubbles and water. If its hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles.
Any tips to peel off the protective liner?
Attach 2 pieces of transparent tape to the front andback surfaces of a corner of the film. Press the 2 pieces of tape firmly together, then quickly pull them apart to begin separating the clear liner away from the static side of the film.
Can I remove the film at a later stage?
Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess.
Why the film fall off after a while?
Please check if you have removed the liner, trimmed the edges or queegeed excess water and bubbles. Leave a 1/16” wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass.