Feature

●[Easy to Install] Adopt back adhesive design, you can easily remove the improved signal sticker and apply it on the phone.
●[Small and Lightweight] Improved mobile phone signal sticker is small and light, which reduces the burden on the mobile phone and is easy to carry.
●[Large Quantity] One pack includes 5 pieces of telephone signal improvement stickers, which is enough to meet your needs for heavy use and long term use.
●[Widely Application] Booster sticker is not only used in mobile phones, but also can improve the reception of walkie talkies, buzzers and even cordless phones at home through PDA two way radio.
●[Signal Enhancement Function] Improved signal stickers for mobile phones can solve the problem of bad signals during elevators or climbing, which can effectively improve reception and reduce static electricity in ships, elevators, cars, buildings, tunnels and mountains.

Description

Note: Do not touch the antenna in the area of the signal sticker too much, otherwise the antenna will easily wear out and become ineffective.

Installation and Precautions:

1. The principle of the signal pole is to improve the range of signal reception by extending the wavelength of the signal received by the phones built-in antenna.

2. Clean the back of the phone, find the position of the phone headphone hole (the charging hole of some mobile phones is the headphone hole), this is the position of most mobile phone sky money; if the effect is not good, change the variety of paste the antenna paste position (see Bild).

3. Tear off the white adhesive paper behind the signal sticker, stick it vertically to the back of the phone, with the English Yu # end and the arrow up (if the back of the phone has a fog film that you need to tear off or has no effect): ¾ stickers after restart

4. Restart the phone after the sticker, most mobile phones directly out of the effect, a small number of mobile phones will be for a period of time mobile phone signal weakness, which are normal, this is part of the mobile phone antenna in the signal detection area. glue the Lin, glue the LIn the signal identification area paste with the phase, you need to wait 24 to see the effect, if the effect is not good, try to restart several times or adjust the position of the paste

5. Be careful when installing and using, do not rub with external forces. and breakage, keep the signal mast clean, do not touch the front of the chip directly with your hands and do not dirty the surface with fingerprints, dirt or welding water.

6. The material and thickness of some mobile phone cases can easily affect the chip. If there is no difference, put the case on and compare it. If there are no differences, install the case. It is recommended not to use a case.


You can not only make calls via the internet, but also watch movies/videos without reducing the speed.	It not only solves problems with the call signal, but also the slow down when playing on the internet is a thing of the past.	One sticker, signal amplification, network acceleration, suitable for all locations