Feature(may vary by option.)
●Wide Compatibility: 210x300mm in size, 0.15mm in thickness, 5 in quantity. Suitable for Elegoo Saturn 2, Saturn 3, Saturn 8K, Saturn S, Anycubic Photon M3 Premium, M5, M5s, M3, M3 Plus, Mono X 6K, Sonic Mighty 4K and other 9.1 - 10.1 LCD 3D printers.
●High Purity FEP: 3D printing special FEP release film, using ultra-high purity FEP resin. Made of hot melt extrusion cast film. With excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics.
●High Transmittance: More than 95% light transmittance 3D release film with high light transmittance, UV light transmittance of more than 95%, so that the printed products are perfect, providing product quality.
●Stable Release Force: Uniform coating, stable release force, good release effect for most resins, smooth and flawless surface, no wrinkles, scratches, bubbles, and other defects, -240°C to 205°C heat resistance and durable quality to meet the requirements of a variety of product release, reusable.
●Excellent Ductility: Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times.
[FEP 2.0]
[FEP 1.0]
Description
|
|
|
|
|---|---|---|---|
| 140*200mm FEP Film | 200*260mm FEP Film | 260*380mm FEP Film | |
|
|
|||
| Customer Reviews | 952
| 413
| 23
|
| Price | — | $21.99 | $39.99 |
| Size | 140*200*0.15mm | 200*260*0.15mm | 260*380*0.15mm |
Compatible Models:
Elegoo Saturn 2, Saturn 3, Saturn 8K, Saturn 4K, Saturn S;
Anycubic Photon M3 premium, M3 plus, M5, M5s, mono X 6K, ;
and other desktop LCD 3D Printers which has fep vat size no more than 210x300mm/8.26*11.8 in(L*W).
ATTENTION: This release film doesnt have a frame, please check whether your resin vat should be replaced with the film with a frame or not.
|
|
|
|
|---|---|---|
High Transmittance210x300 FEP film has a light transmittance of up to 95%, which makes the printed products more perfect. |
High Purity FEP ResinFEP release film has excellent non-stick, high-temperature resistance, insulation, mechanical properties, and wear resistance characteristics. |
Tear off the protective filmIn order to prevent the FEP film, we have protective films on both sides of each film, please tear them off before use. |
|
|
|
|
|---|---|---|
Step 1Remove the screws to detach the steel rings from the resin vat. Tear off the protective film on both sides and take out the FEP film in the middle. |
Step 2Put the new FEP film in-between the two steel rings and install those screws back. You may need to force the screw in. |
Step 3Use a utility knife to cut off the excess release film on the edge and ensure the FEP film is clean and tensioned properly |
