Feature

●Easy to operate, put in the water and the voltage is 24V, then the mist appears.
●With 12 LED (4 red + 4 yellow +4 blue) light, different color group LEDs are lighting up alternately.
●Brand new and high quality. Mist Maker Size: 4.6 cm diameter, 4.3cm tall
●No heat or chemicals used.
●Ideal for indoor or outdoor fountains,pond water,fishtank,Rockery Lanscape feature,Halloween Humidifying atomization and office use.


Description

Description： 
This 12 LED mist maker can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology.You can put it in your pond, rockery,fishtank,vase, birdbath, etc.than it will create a magical atmosphere.

Mist Maker Size: 4.6 cm diameter, 4.3cm tall
Material:Aluminum
Aerosolized amount：≥400mL/H
Disc: 1.5cm.
Output Voltage: 24V DC..
With a US AC/DC adapter .
Input: 110-250V, 50/60Hz
Output: DC 24V, 700mA
Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter
Package included :
1 x Mist maker
1 x AC-DC adapter (US plug) Points for attention:
1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.
2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.
3. Dont touch the atomizing slice while the Mist Maker is working.
4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable,and its service life is≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(dont need to use any detergent).Keep it clean.
Note：The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles