Feature

●Brushless DC High Speed Motor, Voltage 48V, Power 2000W Max, Current 42A, Rated Speed 4300rpm/min, With T8F Chain, 54 tooth Disc.
●48V 2000W Electric Brushless DC Motor, Alloy Body, Full Copper Coil, Heat Resistant, Naturally Air Cooled, Low Noise High Quality More Long Life.
●48V 2000W 18 Mosfet 45A Brushless Motor Speed Controller, With Hall Sensor, Low brake，high brake, 3-Speed (Low Mid High Speed）, Reverse, Indicator Light And Power Lock Functions.
●Twist Throttle Accelerator have speed and reverse Function, With High Quality Aluminum alloy Grips, More Texture，Red Looks More Attractive
●For: Electric Scooter, Motorcycle, E-bike Bicycle, Go Karts, E-bike, Motorcycle, E-Tricycle,Mid Drive Motor Kit, Complete Set,DIY Engine System, Cycling Part,And More. Kit Include: 1pcs Motor, 1pcs Controler, 1pair Throttle,1pcs Chain and 1pcs 54T chainring


Description

36V-84V 45-60A brushless controller

Name: Intelligent dual-mode brushless controller
Rated Voltage: 36V-84V
Low Voltage : 32V
Rated Power: 2000W-3000W
Limit Current: 60A
Number of brushless controller tube：18
Weight：1000g

Brushless controller function：
1.low level brake
2.speed control handle（throttle）
3.cruise
4.hall
5.reverse gear
6.PAS
7.high level brake
8.intelligent recognition（self-learning）
9.phase meter
10.hall meter
11.three speed gear
12.electric door lock（must connect）
13.anti-theft alarm signal（is connect to alarm，if not have alarm，not need connect）
14.anti-theft alarm power（is connect to alarm，if not have alarm，not need connect）
15.multiple data meter
16.motor phase line
17.battery

How to connect controller？
1.connect the motor phase line(color to color）
2. connect the battery line(red:battery+ , black:battery-)
3. connect the controller throttle to throttle and need color to color connect,connect controller electric door lock to throttle electric door lock（if throttle not have electric door lock, controller electric door lock docking,so controller electric door must connect ）
4. connect the hall line(if motor without hall line, dont need connect)
5.docking the two self-learning lines, the wheel will forward or reverse.
(1.if wheel forward ,Separate the self-learning line.
2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)
6.other functions can be connected as needed.