Feature

●Open Source PH Meter: An analog PH meter specially designed for Arduino controller, with simple connection and program control, which is very convenient to measure the PH value of the solution.
●PH Composite Electrode: a plastic non-fillable composite electrode that uses a combination of a glass electrode and a reference electrode. It is a measuring element for a PH meter and is used to measure the hydrogen ion activity (PH) in an aqueous solution. The figure is a manual for convenient secondary development.
●Parameters: +5.00V; Measuring range: 0-14PH; Measuring temperature: 0-60°C; Accuracy: ±0.1pH (25°C); Response time: ≤1min.
●Interface Wiring: BNC/XH2.54 interface; with onboard power indicator. The pH sensor is connected to the onboard BNC interface, and the onboard XH2.54 interface is connected to the analog port of the controller.
●Note: It is the most accurate under the condition of 25℃/5V (the closer to this condition, the more accurate); the practical electrode needs to be checked (when measuring acidic/alkaline solutions, use PH-4/PH-9.18 buffer solution for calibration)


Description

Specification:
Module Power : 5.00V
Module Size : 43 * 32mm
Measuring Range :0 - 14PH
Measuring Temperature: 0 - 60 °C
Accuracy : ± 0.1pH (25 °C)
Response Time : ≤ 1min
pH Sensor with BNC Connector
pH2.0 Interface ( 3 foot patch )
Gain Adjustment Potentiometer

Power Indicator LED

Package List:
1 * PH Sensor Module
1 * PH Probe