Feature(may vary by option.)
●Magnetic Enhancement: For large format resin 3D printers, we have enhanced the magnetic force of the magnetic base. The magnetic build base now has a magnetic force of up to 800 Gauss, which allows large format 3D printers to print models with spring steel plate firmly attached to the magnetic base without falling off and causing print failure.
●Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its original state and reused.
●Size information: The size of the magnetic steel plate is 224* 129mm, and the thickness of this platform is 2.7mm, compatible with Elegoo Saturn 3, Saturn 3 Ultra, Saturn 2 and Saturn 8K. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 2.7mm. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
●Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
●Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printers leveling settings to start printing. It is recommended to print a 2.7mm thick spacer so that the Z-axis can be reset to zero normally.
[Saturn 2(224x129mm)]
[Mars 2 Pro(140*84mm)]
[Saturn(196*126mm)]
[Mono X(202*128mm)]
Description
LCD/DLP Resin 3D Printer Magnetic Build Plate for Elegoo Saturn 3, Saturn 2 and Saturn 8K
Installation Notes:
1.Please clean your build plate thoroughly, let it dry.
2.Please connect your magnet to the plate, let it sit for a couple of hours（More than 24 hours is better）so it is fully seated.
3.Please install the spring steel plate on the magnetic base
4.Please reset the printers leveling settings to start printing
Skills in use:
1.When installing the soft magnetic sheet, it is necessary to ensure that the printing platform is clean and dry. After installation, it is best to keep it in an inverted state, or it can be fixed with a clamp to ensure that the soft magnetic sheet is fully attached to the printing platform.
2.Please ensure spring steel is completely aligned with the magnetic base to avoid the resin entering the gap during use, which will affect the magnetic force of the soft magnet and cause the spring steel plate to fall off.
3.If there are burrs on the surface of the spring steel, please use sandpaper carefully to make sure that there are no burrs before using it to prevent the burrs on the spring steel from piercing the FEP film during the printing process.
4.After printing, do not excessively bend the spring steel when removing the model. After use, use alcohol or cleaning fluid to remove the residual resin on the surface.
5.After using for a period of time, if the model falls off the spring steel sheet during the printing process, you can sand the spring steel sheet with sandpaper to ensure that it has sufficient adhesion.
Package includes: 1PC spring steel build plate+ 1PC soft magnetic sheet