Feature

●Compatible Printer: The steel build plate is for Photon Mono 2 Resin 3D Printer.
●Powerful Magnet: The base offers a powerful magnet, ensuring a perfect fit with the steel plate. An easy lift handle makes it easier to remove the steel plate from the magnetic base.
●Special Material: It has high chromium content, easy to bend and clean. Much easier to remove prints and avoid damage during the process.
●High Quality: Good corrosion resistance and rust resistance. A brushed surface provides better adhesion, ensuring a perfect print.
●After Sale Service: If there are any questions, just contact us freely, and a satisfied solution will be provided within 24 hours.


Description

HzdaDeve Magnetic Steel Plate for Mono 2 160X95MM Flexible Build Platform for Anycubic Photon Resin 3D Printer Accessories Replacement

Specification:
Material: PEI + steel plate
Size: 160X95MM
Compatible 3D Printer: for Anycubic Photon mono 2

Package Include:
1 X Build Plate
1 X Magnetic base

Note:
1. Clean your build plate with isopropyl alcohol and keep it DRY so that the magnet can work normally. Clean the flexible steel plate too with wet paper if necessary. If the room temp in your city is below 10, the print model will be hard to stick to the base, please heat the magnetic base a while before installing.
2. Check the best position to place the magnetic base to your build plate in case it will be shifted. Please tear off the 3M adhesive about 20mm at first and then install step by step completely. You can press it back and forth to make sure there is no gap or bubble.
3. Wait 48-72 hours so that it can work better.
4. Place the flexible steel plate on the magnetic base and make sure the handle faces you.
5. You may need to adjust the z-limit switch after installation. (not all printers need to adjust) It should be around 2.5mm higher. That means the printing height will be reduced by about 2.5mm. You can print a spacer or nut to fill the difference.
6. Level your build plate so that it can work and print.

After-Sale Service:
If there are any questions, just contact us freely, a satisfactory solution will be provided within 24 hours