Feature

●Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature)
●Temperature Control Range: -50 to 100 degree; Input: DC 12V; Output: 10A (MAX), input/output synchronization, can meet all kinds of large power load.
●LED Indicator Light: Display the current output status; Digital Display Tube: Shows measuring temperature, high accuracy of temperature measuring and controlling.
●Three buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time.
●Made of 1.8mm super-thick ABS material, high safety, ageing resistant, sturdy and durable.


Description

Feature:
Name: Microcomputer Temperature Controller
Model: XH-W3002
Temperature Measurement Range: -50 to 110 degree centigrade
Temperature Control Range: -50 to 110 degree centigrade
Measurement Accuracy: +/- 0.2 degree centigrade
Control Accuracy: +/- 0.1 degree centigrade
Measuring input: NTC 10K L = 1M waterproof probe
Input Power: DC 12V
Output Power: 120W (MAX)
Output Type: Direct output (input/output synchronization)
Output Current: 10A (MAX)
Installation Pitch: 73mm (aperture 4mm)
Size: 61x45x31mm
Applied to incubation, equipment case, air conditioning system, temperature control protection, cabinet cooling system, computer temperature control etc. area.

How to set
888: Power on, press the UP and DOWN buttons at the same time more than 3 seconds, restore factory setting.
LLL: In use, means sensor is fault.
HHH: In use, means the temperature is above the range.

Instruction:
Press the setting buton, enter the internal menu. Press the up and down to switch setting parameter. P0: Set Start temperature
P1: set stop temperature
P2: Set temperature calibration
detect temperature + corrected temperature = actual temperature
P3: Set delay start
Press the setting button, use the up or down button to set delay time( Minutes )

Package Include:
1pcs 12V Temperature Controller