Feature
●Contrary to their name, Black Labs heritage actually traces back to Newfoundland in the 1700s, when they were first known as "Saint Johns Dogs." When this large Newfoundland–based breed was mixed with smaller water dogs, the result is the dog now known as the Labrador
●SOLID LONG–GRAIN COPPER (LGC) CONDUCTORS Solid conductors eliminate strand–interaction distortion. Black Labs solid Long–Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen–Free High–Conductivity) copper. OFHC is a general metal industry specification regarding "loss" without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance
●FOAMED–POLYETHYLENE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Black Lab uses air–filled Foamed–Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low–loss and has a benign distortion profile
●METAL–LAYER NOISE–DISSIPATION SYSTEM (NDS) 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipments ground reference requires AQs Noise–Dissipation System. Noise–Dissipation System prevents a significant amount of RFI from reaching the equipments ground plane. SYMMETRICAL COAX GEOMETRY Identical + and – conductors prevent the shield being used as an inferior audio conductor
●COLD–WELDED GOLD–PLATED PLUGS This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. GROUNDING Sometimes there is a hum problem unless the subwoofer and AV receiver (or surround–sound processor) are attached to each other using a separate wire
Description
Cinnamon RJ/E Network Cable
Metal-layer noise-dissipation! Its easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to the ground.
Features
|
|
|
|
|
|---|---|---|---|
SYMMETRICAL COAX GEOMETRYIdentical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor. |
COLD-WELDED, GOLD-PLATED TERMINATIONSThis plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability. |
SOLID LONG-GRAIN COPPER (LGC) CONDUCTORSSolid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. |
FOAMED-POLYETHYLENE INSULATIONAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials. |
