Feature

●Cold–welded silver directly over copper.
●Polyethylene air–tube insulation.
●Solid 1.25% silver conductors
●Carbon–based 3–layer noise–dissipation.


Description

BoxerBoxer

Boxer Subwoofer Cable RCAs

AudioQuest Boxer is a high-performance, low-distortion subwoofer cable that will add some serious bite to any home-entertainment systems bark. It has Solid 1.25% Silver Conductors, Polyethylene Air-Tube Insulation, Carbon-Based 3-Layer Noise-Dissipation System (NDS), and Cold-Welded, Hanging-Silver Directly Over 20.0m Pure Red Copper RCA Plugs.

Features

BoxerBoxer

BoxerBoxer

BoxerBoxer

BoxerBoxer

SOLID 1.25% SILVER CONDUCTORS FOR IMPROVED SUBWOOFER PERFORMANCE

Solid 1.25% Silver-Plated Copper Conductors: A superbly cost-effective way to maximize a video or digital cable, harsh and horrible for full-range audio, but like turning up the “sharpness” for a subwoofer, enhancing articulation and intelligibility.

CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS)

Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

POLYETHYLENE AIR-TUBE INSULATION

Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials.

DOUBLE-BALANCED GEOMETRY

Specifically designed for single-ended applications, Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

Connector Type RCA
Length 3m
Connector Gender Male
Cable Type Composite