Feature

●It is suitable for use on most cars and light commercial vehicles, like Audi, Citroen, Fiat Ford, Honda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, VW, Volvo.
●For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car.
●This clutch alignment tool kit adopts precision manufactured steel bushes with chemically blacked finish to make it more durable
●Material: 45# Carbon Steel
●Package Includes: 8 x Guide Sleeves 8 x Centering Sleeves 1 x Positioning Joint Rod


Description

1 x 150mm Long Alignment Tool Shaft

8 x Pilot Bearing Adaptors:

15.5 x 14.2 x 26.6mm

16.7 x 15.4 x 27.0mm

19.0 x 17.5 x 27.5mm

20.0 x 18.6 x 27.5mm

21.4 x 20.0 x 27.4mm

23.0 x 21.6 x 27.5mm

23.5 x 22.0 x 27.5mm

26.6 x 24.2 x 27.5mm

8 x Clutch Plate Adaptors:

12.6 x 10.8 x 19.2mm

14.8 x 12.2 x 19.4mm

15.0 x 13.0 x 19.3mm

16.0 x 14.7 x 19.7mm

17.7 x 15.8 x 19.4mm

19.0 x 17.1 x 19.3mm

20.0 x 18.3 x 19.1mm

21.6 x 20.0 x 19.1mm

Instruction

1. Select the appropriate guide sleeve for the internal diameter of clutch plate and slide it onto the alignment adaptor bar. Ensure the taper of the guide sleeve runs towards the threaded end of the adaptor bar.

2. Select the appropriate centring sleeve for the spigot bearing and screw it onto the end of the alignment adaptor bar.

3. Slide the clutch plate onto the guide sleeve, ensuring the correct orientation.

4 Fit the centring sleeve into the spigot bearing and slide the clutch plate, on the guide sleeve,up to the flywheel.

5. Fit the clutch pressure plate and cover assembly and bolt in place.

6. Remove the alignment tool.