This home cell phone signal booster has a built-in automatic gain control (AGC) function that automatically adjusts system gain and power level to achieve the optimum result. Improves datas and calls, resolves poor cell signal reception.
Works with iPhones, Android Phones, Pad (with SIM Card), WiFi hotpots (with SIM Card) and supports multiple phones simultaneously, covers up to 3,500-4,500 sq.ft/2-4 rooms, its widely used in Village, Living Room, Bedroom, Corridor, Garage, Basement, Villa, Apartment, Home, Office, Library, Hotel, Restaurant, warehouse,etc
This home cell phone signal booster comes with a 50ft cable,its long enough to separate the indoor and outdoor antennas and the SMA connector is small and will pass through the minimum size hole, its easy to set up and instructions are easy to follow.
Attention:
1. The Cell Phone Booster will cover up to 3,500-4,500 sq.ft/2-4 rooms, if the outdoor signal is weak, it will cover a lot less area inside than stated 3,500sq.ft
2. The cell phone signal booster cant create any signal, it will only boost what it can receive. Which is exactly how this works. If the outside signal is less than 2 bars, maybe it wont boost the signal for your phones
These things are absolutely critical for the cell phone signal booster to work:
1. Confirm your phone is receiving the band 12/17 signal from your carriers tower
2. Make sure the Outdoor Yagi Antenna towards your carriers tower, and could receive 2-3 bars of stable signal at the location where its mounted
3. Keep the inside antenna is about 32ft away from outside antenna and make sure a wall between them. Dont make the outdoor antenna aims at indoor antenna
4. Keep the power is off during installing