Feature

●Package Includes: Each package contains 1 x LCD flow display controller and 1 x G1/2 inch flowmeter, powered by aaa batteries (not included). This system goes to sleep when left unattended and with no water flowing
●Easy To Use: The keys from left to right are set key SET , plus key + , and minus key - . The total water consumption is expressed in liters in L and GAL in gallons, and the unit is passable
●Temperature: The temperature display range is − 99-999, unit C represents the temperature of Celsius, F represents the temperature of Fahrenheit. The temperature units can be passed through, Short press + to switch
●K SETTING: The K value setting character will appear when entering the K value setting interface. When the system works in flowmeter mode, the total flow character is displayed under the main interface
●Total Water Consumption Reset: There is a RESET symbol on the back of the circuit board with two contacts next to it. You can press and hold the SET button, and after the number flashes, use the "+" and "-" signs to modify it to 0. Also by Shorting the two contacts after the system is powered on will clear the total water consumption


Description

Features：
Measurement Range: 0.1-9999L
Voltage: DC5V
Temperature display range: -99 ° ~ 999 °
Key count: three keys
Interface model: SM-3P, SM-2P

Package Includes:
1 x LCD flow display controller
1 x G1/2 inch flowmeter



Display description
①Use time / flow rate display
In the flowmeter mode, when there is water flow, it will automatically jump to the flow rate display, and the total time ( water pressure ) will not be displayed when there is water flow.

② Electricity prompt
The battery power prompt icon will be displayed and flashed when the battery power is low, prompting the user to replace the battery. Charge in electricity
In the case of foot is not displayed.

③Faucet animation ( only flow meter mode ) When water is detected, the faucet animation will begin to show water droplets.

④ Total water consumption, flow rate display
The total water consumption is represented by the unit L, GAL represents the gallon, and the unit can be passed. When the total water consumption is less than 1000L ( or GAL )
When the total water consumption is 9999.99 L ( or GAL ), the value after the decimal point will be hidden.
maximum measurement 99999L ( Note : subject to promotion, if the unit is set to GAL, is also counted 99999L clear 0.
That is to say, 219969 GAL after the Qing 0 ), more than after the re-measurement from 0.

⑤ Total flow character ( TOTAL ) ( only flow meter mode )
When the system works in flowmeter mode, the total flow character is displayed under the main interface.