Feature(may vary by option.)
●Spade Connectors -- You will receive 50 PCS of blue 16-14AWG spade heat-shrink connectors, each Piggyback terminal incorporates 1 male and 1 female spades. Connecting a piggyback spade terminal creates a secure and durable 3 ways connection that can be disconnected in seconds.
●High Quality Heat Shrinkable Tubing -- The heat shrinkable tubing is made of PE material,contained within gel inside, which will stick tightly with the wires after heat shrinking, and the heat shrinkage ratio is 1/3, which is good for sealing and the wires are not easy to fall off.
●Excellent Conductivity -- The connectors are made of pure copper with excellent conductivity, which ensures a more stable connection without worrying about insufficient conductivity affecting operation.
●Easy to Operate -- Spade Heat Shrink Terminals are suitable for many electrical projects and can be connected and disconnected many times quickly, making them safer and faster than traditional connection methods.
●Wide Applications -- Quick connect disconnect heat shrink piggyback crimp terminals can be used on a wide range of marine, motorcycles, automobiles, home repairs, and science projects,their versatility makes them suitable for professionals and DIY enthusiasts.
[AWG12-10 50Yellow]
[AWG22-18 50Red]
[20pcs Red+20pcs Blue+10pcs Yellow]
[AWG16-14 50Blue]
Description
|
|
|
|
|---|---|---|
|
Shrinkage Ratio:3:1 Operating Temperature: from -67℉ to 266℉( -55℃to 130℃) Minimum Shrink Temperature: 80℃/176°F Fully Recovery Temperature : 130°C/266°F |
Each Piggy back terminal incorporates 1 male and 1 female spades，can form a three-way connection. |
Heat-shrinkable connectors are properly heated with a heat gun and will stick tightly to the wires and will not come off, with waterproof function. |
|
|
|
|
|---|---|---|
|
Voltage: 600V A.W.G.：22-16 Amperage: 19A Wire Range: 0.5-1.5mm² |
Voltage: 600V A.W.G.：16-14 Amperage: 27 Wire Range: 1.5-2.5mm² |
Voltage: 600V A.W.G. 12-10 Amperage: 48A Wire Range: 4.0-6.0mm² |
Usage
|
|
|
|
|
|---|---|---|---|
|
1. Strip about 0.8 mm off the outer skin of the wires and prepare terminals of the required size |
2. Use professional crimping tools for crimping |
3. Rotate the shovel type terminals while using a hot air gun for heating,the connector sleeve will adhere to the wire |
4. Heat-shrink finish, these terminals can be used for electrical projects and also for three-way connections |
Wide applicability
|
|
|
|
|
|---|---|---|---|
DIY Electrical Repairs |
Boat |
Vehicle |
Motorcycle |
