[Clear]
Color:Clear
Car Door Edge Guards Kits include:
1 x 16Ft(5M)Trim molding strip measuring
1 x Adhesion Promoter
Car Door Edge Guards are a popular product used as an aide to prevent and protect doors from chips and nicks which over time lead to rust. Car Door Edge Guards are flexible edge molding designed to go on virtually any edge of the vehicle including trunk lids, hoods, doors and grilles. Car Door Edge Guards are available in Black and Clear to color match your car.
Easy Installation Steps:
1.Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing.
2.Uncover the tape from the tip of the lining (Ensure the tape is install INSIDE the door) and peel the red strip off the tape by approximately 2 inches.
3.Start from the top, insert the lining onto your door edge until the lining is fully seated.
4.Press the lining with your thumb along the door edge until it is fully seated, then pull the red strip off.
5.Repeat step 4 until all edges are protected.
6.Use scissors to cut away unused lining for other door edges.
7.Let the lining dry up by itself and do not get wet for at least 12 hours.