Feature

●FITMENT: Replacement front seal kit for pivot / front mount cylinders.
●COMPATIBLITY: Fits Parts: for HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders.
●HS5157 KIT CONTAINS: 2pcs Seal Glands; 1pc Pin Wrench; 1pc Seal Gland Assembly Guide Tool; 8pcs Various O-rings for the different cylinders.
●SUPERIOR MATERIAL: Crafted from High Quality Aluminum Construction with great durability which ensures reliable long-term service.
●100% SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if youre not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.


Description

11

Fits Front Mount Cylinder Parts:

HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755

11

HS5157 kit contains:

  • 1: 2PCS Seal Glands
  • 2: Seal Gland Assembly Guide Tool
  • 3: Pin Wrench
  • 4、5、6、7: Various O-rings for the different cylinders

Simple to Use:

11

11

11

1. Loosening the Seal Gland

  • Place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod.
  • Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland.

2. Removing the Support Bracket

  • Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod.
  • Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning.
  • With hardware gone, pull off the support bracket.

3. Removing the Old Seal Gland

  • Finish unscrewing the old seal gland.
  • If you cant grip it well with your hand, use the pin wrench. Slide it off the piston rod.

11

11

11

4. Installing the New Seal Gland

  • Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease.
  • Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder.
  • Screw the seal gland into the cylinder, but dont tighten it yet.
  • Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.)

5. Reinstalling the Support Bracket

  • Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers.
  • You may need to use wrenches on the opposite nuts to tighten sufficiently.

6. Tightening the New Seal Gland

  • Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque.

Product information