Feature
●PRO TOOLS: Includes Normal Pit & Big Pit Adapter, Standard & Corner Adapter. Pro quality DIY windshield crack and chip repair system; no mixing required; repairs small cracks and rock chips in under 10 minutes; prevents damage from spreading.
●LIKE NEW: The resin, when applied correctly, helps to restore windshield to near brand-new state; the RockPro system is perfect for bulls-eye cracks, spider webs and star damage patterns, and some smaller diameter combination breaks.
●HOT AND COLD: Two distinct formulas ? hot and cold; Hot cartridges work best in 75o F (24o Celsius) or higher, and Cold cartridges work better in 75o F (24o Celsius) or under.
●EASY HANDLING: Clean and dry the glass surface before repair; apply the resin into the break with the RockPro system following the detailed instructions, apply a curing strip (included), then let dry and solidify under ultraviolet light 10 mins. Finally, scrape off the residual resin with a razor blade (included).
●COMPLETE SOLUTION: The RockPro Commercial System is meant to be reused - the Resin Cartridges come as single units, 4 Hot Cartridges and 4 Cold (Pit Filter and Plastic curing strips included).
Description
Do It Yourself - DIY
We are brand that recognizes the need to repair simple windshield rock chips. Different nickel size rocks chip your laminated window and creates spider, bulls-eye, star, half moon crescent cracks. It happens to hundreds of cars a day and they need repair before the crack gets larger and then you will have to replace the entire windshield. We have created the easiest and the most affordable way to repair your windshield.
Do It Yourself - DIY
First step instructions
RockPro’s patent repair kit is quick and easy!
Move car your out of the sunlight to a shaded area. Clean the chip with thumb tack, assemble your RockPro unit, open the red or blue cartridge, cut off the nipple and insert into the RockPro device ensuring it reaches the very bottom. Dampen the suction cups with the wet towelettes and make sure to secure your RockPro device onto the window over the pit until your RockPro device is resting on the glass; once your device is touching the glass give it one more quarter of a turn ensuring a good seal and a snug fit. Turn the auger screw upwards ? counter clockwise ? three quarters of the way up and let it set for about 2-3 minutes until the chip is clear; repeat this process as needed until the chip is mostly clear. Once the chips is clear, push down on the plunger ensuring it goes all the way down. Then, turn the auger screw downwards ? clockwise ? and let the device set for another 2-3 minutes or until the chip is as clear as you can get it.
Second step instructions
Once you’re done working on the chip, park your car in direct sunlight to cure the resin, about 2-3 minutes. Once the resin is cured, gently push your RockPro device out of the way, put one drop of pit filler on pit and cover it with a plastic tab (provided); let this set for another 2-3 minutes.
Third step instructions
Finally, remove the tab, scratch off your excess pit filler with a razor, clean your windshield with glass cleaner and a clean rag, and enjoy your newly repaired, chip-free windshield!
Windshield Repair Kit Includes
- 1 X Portable and durable case
- 1 X Complete Injector with stand
- 1 X Commercial Unit Exclusive ? Corner Adapter
- 5 X Cold weather pit filler / 5 X Hot weather pit filler
- 2 X Push pins
- 2 X Razor Blades
- 1 X Pit filler
- 10 X Cleanser Pads / 10 X Laminates
RockPro Windshield Repair Kits are NOT intended to fix long cracks
It take a professional to drill several holes, pressurize the laminated glass to release the air, a tool to keep that position, then insert the resin, release the tool for bonding, and a whole lot of knowledge to make that repair. Do NOT purchase the RockPro Windshield Kit for long cracks.
RockPro Windshield Repair Kits are intended to fix the chips and cracks below
|
|
|
|
|
|---|---|---|---|
Spider CrackThis type of crack is ideal for the RockPro DIY Windshield Repair Kit |
Bulls-Eye CrackThis type of crack is ideal for the RockPro DIY Windshield Repair Kit |
Star CrackThis type of crack is ideal for the RockPro DIY Windshield Repair Kit |
Half Moon CrackThis type of crack is ideal for the RockPro DIY Windshield Repair Kit |
Suction Cups FAQ Below
We have upgraded our suction cups for commercial use and intended for several repairs.
FAQ:
Question: Sometimes when I do my repair the suction cups stick and other times they dont.
Answer: They normally stick, but sometimes customers put too much pressure from the barrel onto the windshield which prevents the suctions cups from sticking. Reverse the barrel counterclockwise to loosen the barrel touching the windshield, then the suction cups will stick.
Question: Do I need to clean my windshield?
Answer: Yes please clean the windshield before you repair.
Question: Why are my suction cups not sticking?
Answer: Dampen the towelette with water then apply to suction cups.
Question: Should I hold down the barrel to put pressure on the suctions cups?
Answer: Yes if you are unsure if the barrel pressure on the windshield off.