Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.
Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.
Turbo Test: The leakage of coolant would cause the engine to report high water temperature.Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Must-have tool for vehicletechs .The SDT202 Smoke leak detector locator has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. By observing the pressure gauge.the leakage situation is clear at a glance.
Standard Cone Adapter: φ30-85mm, used to seal the airintake ports & introduce smokeinto the exhaust system.
Power Cord Clamp: The cable length is 1.5m with 10A rated current. used to connectthe device to the battery powersupply.
Valve Core Wrench: The double heads measure φ4mm/6mm with an overall length of 122mm & used as a tool to removeand install the EVAP service portvalve core.
Hook: Used for hanging products.
EVAP Special Connector: φ12.7mm, connects to the cars EVAP access port. which then introduces smoke.
Test Oil Refill Bottle: The capacity is 100ml & usedfor adding smoke test oil.
Rubber Connector Parts: The bigger side is φ16/10mmand smaller one is φ4/3mm.used to conetct the hose mouth to a smaller interface.
Universal Airbag Adapter: Its minimum is φ25mm & maximum expansion is φ110-mm,used to seal the air inlet.
Smoke Hose: Length is 1.5m, oil-resistanthose with φ6x9mm taperedcouplings, for conducting air & smoke.
Hard Rubber Hose Plug: Used for sealing the hose. (φ5/10mm, φ9/15mm, φ25/35mm, φ32/45mm, φ45/60mm, φ60/75mm.
|
|
|
---|---|---|
Powerful and easy to operate
|
What is its standout
|
Packing List
|
|
|
|
---|---|---|
Wide Range of Applications
|
Overheat & Anti-frost protection
|
Specifications
|
Special Note: Please dont add more than 30ml baby oil.
How to judge leak?
No Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.
Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.
Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.