Feature

●Material: Polycarbonate - durable material that is made to last!
●Quantity: 4 Pieces
●Please be sure to confirm the bore size of your wheel & vehicle prior to purchase.


Description

Must Read Before Purchase/ Use

FOR SPACERS WITH PRE-ASSEMBLED STUDS: CHECK AND RE-TORQUE ALL LUG NUTS 25-50 MILES AFTER INSTALLATION TO MANUFACTURER SPECIFICATIONS. Wheels must be removed so the nuts holding the spacers to the hub can be retorqued. DO NOT INSTALL IF YOUR FACTORY WHEEL STUDS AND/OR LUG NUTS MAKE CONTACT WITH THE BACK OF YOUR WHEELS. This will prevent wheels from being properly sit & secured to the vehicle. CHECK ALL HARDWARE FOR PROPER COMPATIBILITY BEFORE INSTALLATION. DO NOT USE air tools or impact wrenches. They can cause thread stripping and over/under tightening. (Please follow the recommended torque spec listed in the chart below).

FOR SPACERS WITHOUT PRE-ASSEMBLED STUDS: LONGER STUDS MAY BE REQUIRED FOR PROPER INSTALLATION!!!!

Failure to follow warnings may cause lug nuts or studs to loosen and/or break while driving, resulting in wheel loss, serious accident, injury and/or death. VIBRATIONS COULD BE A SIGN OF INCOMPATIBILITY OR IMPROPER INSTALLATION. Note: This is an aftermarket component. The trademarks used in this listing are registered trademarks of their respective owners, and are used only to identify the vehicles to which this part fits.

customadeonly wheel spacers adapters hubcentriccustomadeonly wheel spacers adapters hubcentric

Product Highlights

wheel spacers, wheel adapterswheel spacers, wheel adapters

We recommend customers start threading the hardware on by hand so as to not cross thread or strip the threads. Once secured hand tight, use the torque wrench set to the proper torque as indicated from a lug nut torque chart below. Tighten the wheel bolts/lug nuts one after the other in a criss-cross pattern. Under- or over-tightening wheel-attaching hardware can be damaging and dangerous. When the lug nuts are over-torqued, this could cause stress fractures and increasing the risks of the lugs breaking under normal conditions.

wheel spacers wheel adapterswheel spacers wheel adapters

How To Measure Bolt Patterns & Recommended Torque Spec:

wheel spacers, wheel adapters, hubcentric wheel spacerswheel spacers, wheel adapters, hubcentric wheel spacers

BEFORE AND AFTER PHOTOS

wheel spacers, wheel adapterswheel spacers, wheel adapters

To keep from rubbing on the fender, we would recommend going with a spacer that is a little smaller than the measured distance.

Product information