Feature

●【VEHICLE FITMENT】- fit for 2011-2013 Dodge Ram 1500 3500 2011-2015 Dodge Ram 2500 2009-2010 Dodge Ram 1500
●【MIRROR FEATURES】 - Location: Driver Side . Color : Black. Heated: Power heated . Folding: Manual Foldable Light: Turn Signal light
●【EASY INSTALLATION】- Identical mounting point with factory mirror. Perfectly fit with the existing electrical wiring.
●【IMPORTANT NOTE】- This mirror is designed to replace an original mirror with these exact options. If you do not have the options listed, there is a possibility that this mirror may not function properly
●【ITEM INCLUDING】 - 1 piece of mirrors (1 Left Side Mirror ), 6 months Limited Warranty

Description

Fit for

2011-2013 Dodge Ram 1500 3500

2011-2015 Dodge Ram 2500

2009-2010 Dodge Ram 1500

Package Including

1 PCS Left side view mirror

POWER ADJUSTED

This is a power mirror, you can adjust the angle of the mirror through the car power switch to maximize the field of view. This power mirror can greatly improve the drivers convenience, allowing the driver to adjust the exterior mirror without further operation due to long distances.

MANUAL FOLDING

The driver needs to reach out of the window or get off the car to fold the mirror.

HEATED

The heating function is more suitable for rain and snow days. When the mirror is heated, the heater behind the lens quickly heats the mirror surface, slowly removing rain or fog from the mirror surface. Drivers do not have to manually wipe the mirror glass manually, which also reduces the risk of driving.

TURN SIGNAL

The turn signal is an important indicator that turns on when the vehicle turns to alert the front and rear vehicles and pedestrians. When you want to turn or change lanes, the turn signal will flash, Let other vehicles notice that you want to turn, avoid in time, and reduce the risk of collision.

Replacement Side View Mirrors

Step 1 - Access

Roll down the window of the car. For electric mirrors, disconnect the negative battery terminal after this.
Remove the screws of the door panel then take off the trim with a pry tool and and finally take off the door panel. If you have electric windows, unplug the harness. Use the nut driver to remove the nuts holding the side mirror in place and then remove it.

Step 2 - Installation

If it’s an electric mirror, replace the harness, checking that everything is properly hooked up. To complete the installation, screw the interior door panel back in place on the door and replace the trim. Put the negative battery cable back on the terminal and tighten properly.
Put side view mirror in place so that the bolts on the mirror are through the holes in the assembly. Tighten the nuts with the nut driver until the mirror is held firmly. Test to see if the mirror wiggles.