Feature
●Cutting Diameter: 1-1/2
●Shank Size: 1-1/4
●Overall Length: 7-7/8
●Number of Flutes: 4
●Insert: APET, APKT, APMT 1604
Description
- Suitable for most face milling applications
- Reduces vibration on long overhang applications
- Chip thinning effect allows for increased table feeds
- High Positive cutting geometry
Product application
Use APKT / APHT / APET / APMT 1604 insert
- Inserts sold separately
Product Spotlight
All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys.
- Fitted with 10 degree positive rectangular inserts allow high depth of cut and feed per tooth
- Easy reference guide for insert number, screw, and other accessories is printed on the tool shank
- Setting Angle: 90 degree
- Radial rake angle: -10 degree
- Axial rake angle: 7 degree
- Screw down insert
- Axial Depth of Cut ap: 0.511"
- Screw: M4 x 8.4
Cutting Parameter
Ramp Milling, Helical Interpolation Milling
