Feature

●UNIVERSAL FIT - Give your Car or Truck an Offloading Aggressive Look.Please verify the shortest width of the fender flare before purchase.
●EASY APPLICATION - No Tools Needed, Just Peel, Stick, and Trim. Total length is 1.5M, it is recommend to purchase 4pcs for one car.
●EASY INSTALLION - Flexible and lightweight foam rubber install in minutes using ultra strong automotive tape (PRE-APPLIED). When the winter is come, if the adhesiveness of the tape is not enough, it might fall off soon after stick on your car. Before using, we suggest that you can use a hair dryer to heat it in order to increase the viscosity or put it in the hot water for a few minutes to soften it to make it easier to bend and fit your car.
●PAINT PROTECTION - Protect The Side of Your Vehicles From Road Debris and Rock Kick up.
●AGGRESSIVE OUTLOOK - High performance JDM racing style, flexible enough to conform to different types of car body.

[2 Pcs]




[4 Pcs]





Description

Car Wheel Tires Eyebrow Strip 2 Pcs Universal Car Wheel Fender Flare Eyebrow Arch Trim Lips StripCar Wheel Tires Eyebrow Strip 2 Pcs Universal Car Wheel Fender Flare Eyebrow Arch Trim Lips Strip

Warming Note

  • Some places may too cold to cause the car wheel tires eyebrow strip to be stiff and cannot be installed.
  • We recommended to blow it with a hot air blower before installation.

Car Wheel Tires Eyebrow Strip Universal Car Wheel Fender Flare Eyebrow Arch Trim Lips StripCar Wheel Tires Eyebrow Strip Universal Car Wheel Fender Flare Eyebrow Arch Trim Lips Strip

How To Install

  1. Please wipe the installation place clean with a rag and alcohol before installation;
  2. Find the exact pasting position and paste the product try to install before tearing the sticker;
  3. Cut the front section of the car wheel tires strip to the appropriate size according to the needs of each car, and then stick it to the edge of the wheel, first tear off a small part of the sticker and paste it accurately;
  4. After the last part is pasted, press firmly on the pasted part;
  5. Tear off the next small part to be pasted again, paste it, and press it firmly by hand, and so on, until it is pasted to the other side;
  6. According to the needs of each vehicle, cut the end of the rubber strip to a suitable size, and paste it to complete.

Product information