Feature

●Hydraulic Steering Support Bracket Puller: Helps safely remove (Most) SeaStar and Uflex support brackets, including older style SeaStar Tournament brackets.
●Front Mount Steering Cylinder Seal Kit: Fit for SeaStar Pivot/Front Mount Cylinders; Fits parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders.
●Benefits: The puller is designed to minimize damage to the steering bracket during removal process. It will remove the toughest support brackets in under a minute; Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering.
●Superior Material: Hydraulic Steering Support Bracket Puller - High strength forged steel with black oxide finish; Seal Kit - High Quality Aluminum. Ensuring a long life service.
●100% SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if youre not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.

Description

Steering Hydraulic Support Bracket Puller

Application:

Fit for (MOST) SeaStar and Uflex support brackets, older style SeaStar Tournament brackets included.

Function:

Helps safely remove SeaStar and Uflex support brackets and minimize damage to the steering bracket during removal process.

Instruction:

Take haft(half) of the bolt out and insert the puller into the bracket
Screw the bolt to lock the bracket
Use a driver or socket to tighten the bolt, pressing the bracket out

Feature:

Teeth design fit to grip the bracket.
Applied with a 3/4" wrench or socket to fit the drive bolt.

Front Mount Steering Cylinder Seal Kit:

Application:

Fit for SeaStar Pivot/Front Mount Cylinders;

Fits parts:

HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders.

HS5157 kit contains:

1: 2PCS Seal Glands
2: Seal Gland Assembly Guide Tool
3: Pin Wrench
4、5、6、7: Various O-rings for the different cylinders

Simple to Use:


1. Loosening the Seal Gland Place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland.	2. Removing the Support Bracket Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.	3. Removing the Old Seal Gland Finish unscrewing the old seal gland. If you cant grip it well with your hand, use the pin wrench. Slide it off the piston rod.


4. Installing the New Seal Gland Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but dont tighten it yet. Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.)	5. Reinstalling the Support Bracket Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.	6. Tightening the New Seal Gland Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque.

Steering Hydraulic Support Bracket Puller

Feature:

Front Mount Steering Cylinder Seal Kit:

HS5157 kit contains:

Simple to Use:

Product information