High quality steel dance pole with high weight capacity up to 441Lb ; Please make sure that all the poles are securely tightened and connected with one another, otherwise potential injuries might occur.
|
|
|
---|---|---|
SpecificationsMaterial: Chrome-plated Steel; Dimension: 15.2 x 15.2 x 108.3"(LxWxH); Adjustable Height: 92.5-108.3"; Pole Dia.: 1.77"; Thickness of Pole: 0.08"; G.W.: 31.44 Lb |
Adjustable height Height can be adjustable from 92.5" to 108.3" |
Spin/Lock the pole Spin the pole |
- 1 x Top Doom: 3.3 x 15.2"(HxDia.)
- 1 x Bottom Base with Spinner: 3.54 x 8.86"(HxDia.)
- 1x Height Adjuster Cover
- 1 x Main Pole A with Adjuster: 43.5 x 1.77(LxDia.)
- 1 x Main Pole B: 40.35 x 1.77"(LxDia.)
- 1 x Extension: 4.92 x 1.77"(LxDia.)
- 1 x Extension: 7.6 x 1.9"(LxDia.)
- 1 x Tool Set
1.The steel pipe is heavy. Its better to install it by two people;
2.In order to keep the steel pipe vertical, it can be measured by a spirit level;
3.Rotate the steel pipe counter-clockwise to adjust the height of the steel pipe and make it stand against the ceiling;
4.When you rotate the steel pipe, do not force excessively, otherwise the top plate will be damaged;
5.Please ensure that the marking hole is aligned with the center line, and then tighten the inner hexagonal screw with inner hexagonal wrench;
6.You can test the stability of the steel pipe by lifting your feet off the ground.
NOTE:Lock the screw after aligning the mark hole with the center line. Otherwise, the screw will jam the thread of the adjusting rod and damage the adjusting rod.
Frequently Asked Question
1. Q: How to adjust the height of steel pipe?
A: You can adjust the height through the threaded adjustment rod at the top.
Please note: the extension distance of the adjusting rod should not exceed 125 mm.
2. Q: The ceiling is too high. What if the extension tube in the package is not enough?
A: If you need to add longer lengthening tubes, please check the altimeter or call after-sales service for details.
3. Q: How to convert the static and rotation mode?
A: There are two screws at the bottom of the pipe, and you can adjust it by tightening (for static mode) or loosening (for rotation mode).