Feature

●? Compact Size: 35*8.5*8.5 cm (L×W×T), easily stored in your car or anywhere you like; Only weights 2.1kg, lightweight and portable;
●? Heavy Duty: Lifting capacity up to 2 Ton, more than enough to lift most vehicles, such as SUV/Van/Small Truck or RV etc.;
●? Extension Height: The scissor jack, with tooth gears, can extend from 90mm (close position) to 360mm, easy to operate using the chromed crank with speed handle;
●? High Quality: The scissor jack is in good steel material and anti-oxidation painted, durable in use;
●? NOTE: Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts. If the jack is found to be damaged, it should be removed from service until properly repaired. We provide 2 years warranty for the product, full refund or free replacement can be provided! Easy-to-Reach Support. Buy with confidence!


Description

Package included:
1 x Scissor Jack
1 x Handle

Specification:
Minimum height: about 90MM
Maximum height: approximately 360MM
Lifting: 2 Ton
Color: Black
Material: Steel
Net weight: 2.1KG
Item Size: 35*8.5*8.5 (L×W×T)
Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.

Before Use:
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.

OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

CARE AND MAINTENANCE:
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.