Feature

●This power supply is specially designed for RECI Z1S1Z1(75-90W) laser tube
●Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
●Easy control: the start and stop of laser can be easily controlled by TTL level.
●The power supply has TTL signal indication, water through signal indication and laser output indication.
●Application: Replacement Parts for CO2 Laser Tube and CO2 Laser Engraver /Cutter / Marker

[110V]

[220V]

[110V 150W for RECI W6 | W8]

Description

Leadshine 2 Phase Stepper Motor 57HS22for Nema 23 5.6A Length 81mm Shaft 8mm

Advantages

Zero-current half-bridge soft-switching circuit..
High efficiency and fast response.
Match various manufactures of tubes.
High performance,large cutting power

Factory aging test

Each power supply will through 60℃ and 12 hours aging test under full load.
500 times 7 seconds Start/Stop test.

Features

DY10 80W

This power supply is specially designed for RECI Z1S1Z1(75-90W) tube
Simple port control ,T TL level signals can control the lasestart/stop.
Protection switch is to check the outside water, ventilation.etc.
Application:Replacement Parts for Engraver /Cutter / Marker

Power adjustment : input OV to 5V analog signal, can also input PWM signal
Open circuit protection functon: avoid the damage to power supply due to tube burst.

Specifications ( DY-10)

Input Voltage	AC 110V/AC 220V
AC Frequency	47-440Hz
Max Output Voltage	35KV
Max Output Current	23mA
Weight (kg)	1.7
Efficiency	90%
MTBF	≥10000 hours

Response Speed	≤1ms
High Level	≥3V
Low Level	≤0.7V
Environment	-10°~+40°
Cooling	Forced air cooling (fan cooling)
High temperature Test	Full Load/60℃/12 hours
Start/Stop Test	500 times 7 seconds

Photoes

80W CO2 Laser Power Supply 220V PSU DY10 for RECI W1/Z1/S1 Co2 Laser Tube

Connection Diagram

If the power supply does not work, please find us in time. We have a professional technical team to answer your questions until you are satisfied. (including free returns)

Product Packaging