8. ALL POSITIONS – Install kit body mounts on kit steel mounts, Assemble the kit components as shown.
9. ALL POSITIONS – When installing the new assemblies onto the frame, make sure they are seated into the frame and centered in the hole.
10. POSITION 1 – Install kit body mount M04060-02 on the top, and kit body mount M04060-01 along with kit washer S10126 on the bottom. Run the bolt in from the bottom and start it but don’t tighten it yet. Start the upper nut on the radiator support but don’t tighten it yet.
POSITIONS 2, 3, & 4 – Working on one position at a time, install kit body mount M04060-02 on the large kit steel top half and kit body mount M04060-01 on the small kit steel bottom half. Start the bolts but do not tighten.
Repeat steps 4 through 11 for the driver’s side.
11. Tighten all bolts in an alternating cross pattern (as with tightening wheel lug nuts) until you can feel the stock metal shells seat together (around 45-55 ft. lbs.). Tighten the top nut on the radiator core support mount last.
12. Reinstall the body cab plugs, and if removed, reinstall the seat, trim, and upholstery.
13. Reinstall the airbag fuse and reconnect the battery.