Feature
●Specifications: Cutting dia.: 48mm / 1.89"; shank size: 10mm / 0.39"; cutting depth: 25mm / 0.98"; overall length: 101mm / 3.98"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters
●General Purpose: Can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals below 5mm. Suitable for round or square pipes, equipment cabinet
●All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works
●Application: Can be used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines
●Warm Tips: Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm
[70mm]
[80mm]
[60mm]
[51mm]
[53mm]
[75mm]
[45mm]
[58mm]
[48mm]
[90mm]
Description
Product Information
- Widely used for drilling holes on metal plate in the kitchen room, door structure, equipment cabinet and cable box. Precise drilling for electric boxes to smoothly assemble buttons, switches and displays.
- Stepped pilot drill bit design protects carbide teeth from impacting perfectly when the pilot drill bit cuts through the cutting material. Split point pilot drill bit prevents bit bouncing.
- Please take measures to protect your skin and eyes. Apply anti-rust oil for longer service life after use. In order to prevent chipping, please avoid making the edge of the hole opener have a severe impact when cutting materials.
T-shaped Angle Grinding Gear
- The tooth part is made of high tungsten carbide alloy steel, hardened up to HRC64-65, long service life.
- With tungsten carbide grit and brazing technology, hole cutter can make precise and smooth holes.
Carbide Hole Cutter with Special Design
- Hole chip flute can quickly discharge iron chips even when processing thick steel plate.
- It also can effectively avoid the iron filings remaining between the blade and the processed material, which will cause tool collapse and jamming.
- Three-edged combined tooth design, layered components cutting, low cutting resistance, fast drilling speed
- Can not be used on impact drills and electric hammer drills.
- Can make smooth cuts into material like stainless steel, high alloy steel, aluminum, plastic, FRP and PVC. Suitable for round or square pipes, steel sheets, iron plates.
- Can be used on hand held drills, bench drills, magnetic drills, pneumatic drills and other rotating machines
Important Notice
- With a positioning center drill, the hole opener needs to be manually installed and tightened before use. The damaged center drill can be replaced.
- The center drill cuts first when working, and carbide teeth touches the work piece before drilling holes. The center drill plays a positioning role.
- When cutting continuously, please choose a lower speed and pay attention to the use of cutting fluid. If there is no cutting fluid, please consider using soapy water or good fluidity grease to cool down and lubricate in time.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Carbide Hole Cutter | Carbide Hole Cutter | Carbide Hole Cutter | Carbide Hole Cutter | HSS Hole Saw | HSS Hole Saw | |
| Cutting Dia. | 22mm | 90mm | 40mm | 15mm | 28mm | 36mm |
| Tip Material | Carbide | Carbide | Carbide | Carbide | HSS(High Speed Steel) | HSS(High Speed Steel) |