Feature

●①【Reliable performance】:If the water sensor detects water leakage or a preset over limit, the water detector will emit a 80dB alarm sound, and the alarm will sound within 60 seconds and the alarm message will be sent within 2-10 seconds Send to smartphone (depending on network speed). To prevent possible water damage.
●②【Sound and light alarm】:Even if there is no Wi-Fi, the scene can still emit a 80 dB loud alarm and a red flashing on-site alarm, even if there is a leakage in the basement, a sufficient sound can be heard
●③【Widely applicable】:Perfectly suitable for houses, warehouses, basements, continuous monitoring of sinks, dishwashers, household appliances, refrigerators, washing machines, sewage pumps, water heaters, hot tubs, water pipes and filtering devices. Swimming pool, bathtub, fish tank and sensors warn of water level.
●④【Battery Powered】:Built-in rechargeable battery (included), can be used for one year, and you can check its power on the application. 6.6 feet / 200 cm long water detection sensor cable for flexible placement
●⑤【Installation and use】:No need of gateway and complicated wiring, only a few simple steps to connect to home WiFi (only applicable to 2.4G WiFi). Whether you are in the office or on the go, you can use the TUYA / Smart Life app to check the status at any time. You can also share it with others, and more people can receive alerts and track the activity of wireless sensors.

[Portable Small Detector]




[Upgrade the Big Detector]





Description

Places the water leak detector in any location where there is a potential for water damage and flooding

  • Under Sinks/Near Water Heater /Basements /Near Dishwashers and Refrigerators /Under Fish Tanks
  • Near plumbing and toilets /Behind Toilet/By the Washing Machine./By Water Filtration Units
  • Under Garbage Disposals/Near Plumbing/Near Sump Pumps
  • Under Utility Sinks/Under Plumping Outlets

How to Connect the Water Leak Detectors to Your Phone?(Dual Mode Pairing)

  • Smart Pairing Mode:Smart pairing mode: long press the smart key for 6-12 seconds until the green led blinks quickly (5 times persecond). Connect your phone to wifi, open the app and click the + on the upper right corner Choose Others Others(WIFI) Click confirm indicator rapidly blink Enter your wifi and password Connecting Connect successfully.

  • AP Pairing Mode: Trigger the sensor alarm first,and then long press the AP key for 6-12 seconds until the green led blinks slowly (one time persecond). Connect your phone to wifi, open the app and click the + on the upper right corner Choose Others?Others(Wi-Fi)Click other mode Click AP mode Confirm indicator slowly blink Enter your wifi and password Go to connect your mobile to the device’s hotspot Exit when connected Connecting successfully.

  • Notice：the pairing mode is only 60 seconds. The green led would auto go off in 60 seconds. If the pairing fails, you need to repeat the paring procedure.If the pairing fails many times, please kindly refer to the instruction part 5: Notes for device pairing.