Feature

●Ultimate bundle to maximize CaNibbles uses. Bench clamps for freehand cutting and a straight & circle cutting attachment - to do exactly that.
●Patented cutting action, its the most manoeuvrable sheet metal cutting tool available and is great for every job. Cuts up to 1,200 ft on one punch
●Three Punches and an extra Die included, thats up to 4,800 ft of cutting.
●The Professional Nibbler works with any 9mm chuck capacity drill that runs 1,500 to 3,000 RPM creating a powerful metal-cutting action.
●Quick, safe, and easy to use - There is NO distortion of material shape and NO burrs or sharp edges. No experience necessary.


Description

About:

Tracing its roots back to the original drill attachment nibbler with over 40 years of refinement, the CaNibble Professional Nibbler is the original and still the best. Attaching to any standard drill operating between 1,500 - 3,000 RPM, the CaNibble Professional Nibbler is the easiest, fastest and safest way to cut sheet material, cutting at a rate of up to 5 feet (1.5 meters) per minutes. Manufactured in Australia from high-quality materials like high-speed steel and Aluminium, we back each tool we make for a five year period.

With pioneering innovations like its attachable form, a 360-degree cutting head and its actuating cutting design, the Professional Nibbler is the only nibbler with a patented cutting action (USA 8,783,147 Australia 2006203562, China ZL200710142640.6) making it the most refined nibbler on the market. So put down those tin snips or cheap copies, and experience the ease, speed and manoeuvrability of the CaNibble Professional Nibbler.

Technical Specifications:

· Fits most standard drills (keyed or keyless chuck), corded or cordless that operate between 1,500 - 3,000 RPM (Recommended 500 Watt+)

· Cuts straight lines, circles and everything in-between

· Cuts flat, corrugated and complex profiles

· Leaves no burrs, no distortion and no sharp edges

· 360 Degree indexable cutting die

· Safe to use with no ingress for fingers

· Cutting rate of 5 Feet/minute at 3,000 RPM

· The cutting kerf is 0.157" Inch (4mm)

· Highly manoeuvrable with a minimum turning radius of 0.315" Inch (5/16" or 8mm)

· Can by those who are either left or right-handed

· Up to 1,200 Feet (365 Meters) of cutting life per punch depending on the type and thickness of the material

· Australian Made & Owned

· Cuts Aluminium, Brass, Fibreglass and Plastic up to 14 Gauge (2mm), Corrugated Iron and Mild Steel up to 16 Gauge (1.6mm) and Stainless Steel up to 19 Gauge (1mm)