Self-Programmable Remote Car Key Replacement
An inexpensive replacement for your original remote key fob, the Keyless2Go car key replacement is self-programmable and comes with easy do-it-yourself instructions to help you program your new car key at home. Enjoy keyless entry on select vehicles from Ford and Lincoln. Each fob key has been pre-tested to ensure fitment and that signals are transmitting properly. Every remote key fob comes complete with batteries and free tech support to help get your new key fob working.
Compatible with:
2003-2007 Lincoln Navigator
*Please match the buttons with your original remote.
How to Program your Keyless2Go Key Fob Replacement:
1.Close all doors, then open driver’s door and press the Unlock button on driver’s door while it is open and insert key into the ignition.
2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1)
(Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
3. Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5.
4. Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4 for all other remotes.
5. Turn ignition to OFF. Locks will again cycle to indicate the end of programming mode.
*If this does not work try the procedure with the door closed.