Our professional R&D team spent two years developing an upgraded soil tester based on feedback and suggestions from Amazon customers.
1.The enlarged screen provides an elegant and easy to read display.
2.The improved probes are more sensitive to sensing changes in the soil and pass details to the conductor to show accurate values.
3.The upgraded light-sensing receiver directly faces the sun, increasing the incident area of light and making the light-sensing receiver more sensitive.
Kindly Note:
1. Do not force it into very hard soil or touch hard objects since it will be easy to damage the probe.
2. Do not use it to test pure water or other liquids. It can only be used to measure soil.
3. Do not leave the meter in the soil for a long time.
4. Please wipe and clean the probe after each use.
5. If the soil is too dry the indicator will not move, and water it before testing.
Step 1: Switch to moisture/pH/light position according to demand.
Step 2: Insert the probe into the soil about 6-7 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: Check moisture/pH/light level in the dial after 10 minutes.
Step 5: Remove probe from soil and wipe clean after each use.
Step 1: Switch to moisture/pH/light position according to demand.
Step 2: Insert the probe into the soil about 2-4 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: Check moisture/pH/light level in the dial after 10 minutes.
Step 5: Remove probe from soil and wipe clean after each use.
Step 1: Switch to moisture/pH/light position according to demand.
Step 2: Insert the probe into the soil about 2-4 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: Check moisture/pH/light level in the dial after 10 minutes.
Step 5: Remove probe from soil and wipe clean after each use.
Step 1: Switch to moisture/pH/light position according to demand.
Step 2: Insert the probe into the soil about 2-4 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: Check moisture/pH/light level in the dial after 10 minutes.
Step 5: Remove probe from soil and wipe clean after each use.
|
|
|
---|---|---|
Test Soil MoistureHelp you specialize in grasping when you need to water your plant. |
Test the pH of the SoilHelp you to control the pH value in the soil. |
Test Sunshine LevelKnow about whether it gets adequate sunlight. |