Feature

●? Compatible with Canon EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II; PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16; Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc.
●? Compatible with Canon EOS R5, 10D, 6D MarK II, 1D X Mark II, 1D X, 1DX Mark III, 1D C, 1DS Mark III, 1DS Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 5D, 6D, 7D, 7D Mark II, 50D, 40D, 30D, 20D, D2000, D60, D30, EOS-1V, EOS-3
●? Compatible with Fujifilm GFX100, GFX100S, GFX50R, X-Pro3, X-T3, X-T4, X-T30, X-A7, X-E1, X100V; Compatible with Olympus OM-D E-M1X, E-M1 Mark II, E?M1 Mark III, E-M5 Mark III ; Compatible with Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1; *ist D, *ist DL, *ist DS, *ist DS2; Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax 645, N1, NX, N Digial; Sigma Sd1
●? Timing setting can be accurate to 0.1 seconds. 5 setting for timing control: Delay (Self timer), Interval (Interval timer) and Long (exposure timer), N (number of frames setting); BKLN (Auto bracketing timed exposure setting for HDR, shutter release with instant, continuous 3, 5 or 7 shots). 4 modes for shutter release control: S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay)
●? Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. You can change different shutter release cable to work with different cameras. Replaces TC-80N3 timer remote control RS-60E3 remote switch, Fuji RR-100, Olympus RM-CB2. Wireless and wired operations.

[for Sony]

[for Fujifilm]

[for Olympus & Panasonic]

[Compatible with Canon & Fuji & Olympus]

[for Nikon]

Description

Features

The PHOLSY is a combined wireless and timer controlled remote shutter release. It is ideal for a wide variety of photographic uses that require timed or contact free shutter release, including wildlife, long exposure, astral, studio and time lapse photography.

The wireless/wired timer and shutter release offers photographer an amazing number of triggering options, including Auto bracketing for HDR, shooting photos wired or wirelessly using self-timer, interval timer, long exposure timer or a combination of the three, auto bracketing long exposure mode for HDR photography, and it will shoot 3, 5 or 7 shots with Auto bracketing shutter speeds.

Cable length: Not stretched 35 cm; stretches to approximately max 130 cm

Transmission distance: 2.4GHz 60m+ (open space without interference)

Dimension: Timer - L 130.4mm X W 46.2mm X H 22mm; receiver - L 85mm X W 37.4mm X H 30.9mm

Weight: Timer 56.5g; receiver 37.5g

Box Contains

1 X PHOLSY wireless timer remote control timer

1 X PHOLSY wireless timer remote control receiver

2 X Connecting cables N8 and N10

2 X Lanyard sling

1 X Instruction manual

Setting the Smart Code

If the Receivers light doesnt change to red, that means it hasnt received the signal from the Transmitter. Please follow the below steps to set the Smart Code.

The frequency of transmitter and receiver will be pre-set in production. You can use the timer instantly. To reset the smart code, please follow the procedures:

1. Turn on the transmitter and receiver.

2. Use a needle-like object to press into the code setting button on receiver, which will cause the LED on receiver to flash red and green light alternately for 25s. Press the shutter button on transmitter to reset the code during the code setting mode. When the code is successfully set, the LED on receiver will get back to normal mode，flashing green light.

Note:

A transmitter can control multiple receivers simultaneously. A receiver can receive signal from one transmitter only.

When capturing the beautiful moments of sunrise and sunset and flowers bloom and fade, you dont need to wait for the whole time . You can set delay timer, exposure time, interval time, number of shoots, repeat shooting interval time and repeat times.

Using Timer mode

1.Press the Sound/Mode Button until Timer is selected on the LCD.

2.With Timer selected, press the left or right Adjustment Buttons to select DELAY, LONG, INTVL, N, BKLN. A small indicator line will appear on the LCD under the selection.

Press the Play/Stop Button to start or stop programmed timer functions.

Large LCD Display gives you a visual reference so you can operate the remote controller easily.

Changing shutter release modes

Press the Sound/Mode Button to cycle between modes. A small indicator line will appear on the LCD over the selection. The modes are:

S: Shutter Release.

C: Continuous.

B: Bulb.

2S: 2 second.

Timer: Gives access to the timer mode functions.

Press the Shutter Release Button to start or stop the four shutter release modes.


Timer can be accurate to 0.1 sec. You can set the delay time and exposure time to minimum 0.1. The minimum interval time is 1 sec, you can adjust the intervals in 0.1 increments starting at 1 second.	Shutter Connecting Cable Interchangeable It is available to change shutter connecting cable for different camera models	Image stabilization Prevent hand shaking	Wireless or Wired More options for needs


	PHOLSY Wireless Timer Shutter Remote Release Control with HDR and Intervalometer	PHOLSY Wireless Shutter Remote Release Control Camera Remote Control	PHOLSY Wired Timer Remote Control Switch with Intervalometer	PHOLSY Wired Shutter Remote Control Release Switch	PHOLSY Wireless Remote Control
Wireless remote	?	?			?
Wired remote	?	?	?	?
Timer remote	?		?
Zooming and shoot videos					?

Setting the Smart Code

If the Receivers light doesnt change to red, that means it hasnt received the signal from the Transmitter. Please follow the below steps to set the Smart Code.

Note:

Videos