Feature

●High Quality Go-karts Chains, Scooters Chains, Mini Bikes Chains
●40 Roller Chain 10ft with Master and offset Links for GO Kart, Mini Bike Chains Replacements
●#25-60 Roller Chain Cutter, Chain Breaker, Chain Detacher
●# 25-60 Chain Puller, Chain Holder, Chain Tensioners
●For use in connecting or repairing #40 standard and heavy series roller chain

[#41 Chain with tools]





Description

Single strand roller chain is the most common chain that are used for a wide variety of applications such as industrial, agricultural, lawn and garden and much more.

All of our roller chain products meets ANSI specifications to offer great quality durable products.

ROLLER CHAIN PARTSROLLER CHAIN PARTS

HOW TO MEASURE CHAIN SIZE

HOW TO MEASURE CHAIN SIZEHOW TO MEASURE CHAIN SIZE
Each of these components will be measured separately

  • Pitch: The length measured from center of pin to center of pin. (P)
  • Roller Diamete : The outside diameter of the roller. (D)
  • Plate Height : The dimension from top of plate to bottom of plate.(H)
  • Pin Diameter: The outside diameter of the pin.(F)
  • Pin Length : From the outside of pin end to the other side of pin end. (A)
  • Plate Thickness: Thickness of the plates from one flat side to the other side of the same plate. (T)
  • Roller Width : The inside width of the inner side plates ( W)

  • Factors to consider when choosing an ideal pitch of chain would include:
  • 1. In-board or out-board drive sprocket configuration
  • 2. Availability of engine sprockets, Final desired gearing
  • 3. Set-up difficulities (length of chain measurements)

HOW TO MEASURE CHAIN SIZE

As a first step, we should define the components of roller chain

  1. Pin Link Plate : This is an outer plate on the pin link of roller chain.
  2. Roller Link Plate : This is an inner plate on the roller link of roller chain.
  3. Roller : This rotates on top of the bushing on the roller link.
  4. Pin : This is press fit into the pin link plate and bisects the bushings in the roller link.
  5. Bush : This is press fit into two roller link plates and is bisected by the pin in the pin link.

  • What Size Chain Should I Buy ?
  • Most go kart chains and mini bike chains have the chain size stamped directly on the chain links.
  • #35, 40, 41, 420 and 50 chain are used on American Go Karts and Mini Bikes.
  • An 11 or 12 tooth clutch sprocket usually indicates the use of 35 chain.
  • 10 tooth clutch sprockets usually indicate the use of #40, 41 or 420 chain.

POWER TRANSMISSION ROLLER CHAIN SIZE CHART

35 ROLLER CHAIN35 ROLLER CHAIN

40 ROLLER CHAIN40 ROLLER CHAIN

41 ROLLER CHAIN41 ROLLER CHAIN

ROLLER CHAIN CUTTER PULLERROLLER CHAIN CUTTER PULLER

10 FOOT 35 ROLLER CHAIN

  • Pitch : 0.375 inch
  • Roller Diameter : 0.200 inch
  • Width between Inner Plates : 0.188 ihch
  • Pin Diameter : 0.141 ihch
  • Inner Plate Depth : 0.354 ihch
  • Plate Thickness : 0.051 ihch
  • Average Tensile Strength : 2100 lb

10 FOOT 40 ROLLER CHAIN

  • Pitch : 0.500 inch
  • Roller Diameter : 0.312 inch
  • Width between Inner Plates : 0.310 ihch
  • Pin Diameter : 0.156 ihch
  • Inner Plate Depth : 0.472 ihch
  • Plate Thickness : 0.059 ihch
  • Average Tensile Strength : 4000 lb

10 FOOT 41 ROLLER CHAIN

  • Pitch : 0.500 inch
  • Roller Diameter : 0.306inch
  • Width between Inner Plates : 0.346 ihch
  • Pin Diameter : 0.141 ihch
  • Inner Plate Depth : 0.591 ihch
  • Plate Thickness : 0.051 ihch
  • Average Tensile Strength : 2400 lb

25-60 ROLLER CHAIN CUTTER PULLER TOOL

  • TOOL APPLICATIONS: Roller Chain Tool Kit for 25, 35, 41, 40, 50, 60, 05B, 06B, 08B, 10B, 410, 43, 65, 415, 42, 415H, 420, 423, 428, 28H, 520, 530, 25H, 40H, 50H, 60H, C2040, C2042, C2050, C2052, C2060, C2062, A2040, A2050, A2060

WHEN TO REPLACE YOUR ROLLER CHAIN

There are a few ways to know when its time to replace a roller chain.

  1. When the chain elongation has reached 1.5% (this may be less when using sprockets that have more than 60 teeth).
  2. When the link plate has some damage (cracking, distortions, etc..)
  3. When any other component of the roller chain has damage (cracking, distortions, irregular movment etc..)
  4. When pin has bending or wrapped, or distortion of link is found.
  5. When substantial rust or improper flex is found.

ROLLER CHAIN MAINTENANCE

When buying any roller chain it is important to properly maintain it. Doing routine maintenance to a roller chain not only improves safety, but it also reduces down time, energy consumption, and drastically improves the chain life.

  • Chain wear elongation : As a general rule, most roller chain drive applications can be considered to be worn out at a length increase of approximately 1.5%. It is also important that your chain is regularly checked for wear.
  • Chain lubrication : Proper lubrication of roller chain drives is an important factor in getting the best possible performance from drive systems. No matter how well a transmission system is designed, if it is not properly lubricated its service life will be shortened. Incorrect or insufficient lubrication is one of the primary reasons for premature roller chain wear and eventual failure.
  • Chain slack : Roller chain operates most effectively when there is a suitable amount of slack. If too much tension is applied, the oil film between the bearing surface areas (i.e. the pin and bush) can become restricted or broken, causing increased wear and damage to the bearing components.
  • Sprocket wear : Once a sprocket has worn, it can cause rapid chain wear and will need to be replaced at the first available opportunity. Replace it too early, however, and you could be incurring unnecessary costs.
  • Length: Make sure you order enough chain, any extra links can always be removed. Do not run the chain too tight, it will grind the sprocket teeth down in a short period of time.

FDJ MINIBIKE GO KART CHAIN ROLLER CHAINFDJ MINIBIKE GO KART CHAIN ROLLER CHAIN

Power Transmission Roller Chains

  • High Quality Go Kart Chain, Mini Bike Chain.
  • Standard Roller Chain for most brands. 35 Chain, 40 Chain, 41 Chain.
  • Go Kart Chain Tools, Go Kart Chain Tensioners and Master Links.
  • #25-60 Roller Chain Cutter / Chain Breaker / Chain Detacher
  • # 25-60 Chain Puller / Chain Holder / Chain Tensioners