Feature

●【Faster 】: These air vent caps replacement Allows faster and smoother flowing fuel/water/kerosene,Saving your time
●【Safer】: Push In Vent Cap is a better sollution than just poking a hole in the can because when you transport the full can, you can close the cap and prevent gas from sloshing out
●【Easy to Install】: Drill a 1/2" hole into the can, then push the vent into the hole, the vent cap needs to sit in tight to give a good leak proof seal
●【Save your Can】: These breather vent caps kept you from throwing away your old cans and repairing your gas cans, No more glugging and spilling when fueling


Description

Yellow Vent Caps prevent from popping out of your can. Easy to install,drill required.Start with an empty can, Drill 1/2" hole at the back of your plastic can above the fill line, insert vent cap and pop it in gently with a rubber mallet.We suggest you drill a smaller hole to start with and work your way up to the 1/2" drill bit. Be sure to drill a straight clean hole dont swagger side to side with the bit so you wont make a bigger hole than you need. The Vent cap needs to sit in tight to give a good seal. Be sure to clean out your can prior to usage.