Feature
●Accurately controls CO2 levels in greenhouses or grow rooms
●Built-In light sensor that automatically turns off LEDs lights and CO2 enrichment during dark period
●Piggy back plug allows for control of CO2 generator or tank with electronic regulator
●Easiest CO2 controller to use in the industry, Controller automatically adjusts CO2 level according to altitude
Description
RAD-0501 Day/Night CO2 Monitor and Grow Controller
- Easy to use CO2 Monitor and Controller
- Once the Carbon Dioxide (CO2) levels have reached your desired set point the RAD-0501 will disable the CO2 device
- Accurate. Using NDIR CO2 Sensor Technologies
- A simple, accurate, easy to use controller for indoor grow rooms, facilities, and cultivation settings.
- Easy to use, “plug and play” capabilities; plug it in and allow your crops to be accurately monitored and control the environment in your grow room
- Includes a Photo Sensor that Turns off CO2 at Night
- Fresh Air, Automatic Easy Calibration
The Day/Night CO2 Controller can be used in greenhouses, grow rooms, hydroponics rooms, and other places where elevated carbon dioxide levels are used to maximize plant growth.
- Accurate CO2 Generator Control
- Photo Sensor Turns off CO2 at Night
- Easy Fresh-Air Calibration
Electrical
- Power: 110VAC Grounded US Plug Only
- Power Consumption:2 Watts Maximum
- Power Consumption:2 Watts Maximum
Photosensor control saves dollars and energy
by ensuring you’ll only be supplying CO2 during the light cycle when it is needed.
The Day/Night CO2 Monitor & Controller lets you set high and low target CO2 levels. Using advanced hysteresis logic, when CO2 levels get too low, power is supplied to a CO2 generator or regulator via the built-in 100-240 VAC 5A piggyback power cord. When the target level is reached, the power is turned off. In addition, the CO2 Monitor & Controller has a built-in photo sensor that overrides the CO2 control and shuts off the CO2 when it senses darkness.
- Easy to read display with all functions set from 3 push buttons
- Power, upper limit, lower limit and photo sensor verification LEDs
- Non-UV Emitting LEDs - no interference with the grow cycle
- IP54 Enclosure - cover during cleaning, fertilization, or washdown
- Default settings: Low Set Point - 800 ppm. High Set Point - 1,500 ppm
High Quality
- Measurement Range: 0-10,000ppm
- NDIR CO2 Sensing Technology
- Accuracy: ± 70ppm or ± 5% CO2
- Sensor Response Time: < 2 minutes
- Operating Temperature: 32° to 122° F
- Calibration: In-situ with fresh air
- Sensor Life Expectancy: 15 years
- Relay: One Relay output, Peak Current < 5A@ 250 VAC, SPST. Normally Open
- Max Coverage Area: 1,500 sq.ft. with proper air handling
Best of all, the CO2 Monitor & Controller is easy to install and use. Simply mount the unit inside your grow room, (all cables and hardware included), plug it into a standard wall jack, plug in your CO2 generator or regulator and it is ready to maximize your plant growing yields.