[20W 520mm]
[50W 800mm]
[40W 700mm]
[80W 1250mm]
Attention
Length | 700mm (±10) |
Diameter | 50mm |
Power | 40W |
Wavelength | 10.6μm |
Laser Beam Diameter | 3mm |
Mode | TEMOO |
Package | 1 pcs, 1.5KG |
Working Current | 10mA-12mA (Max 15mA) |
Maximum output current | DC20mA |
Input Voltage | AC90-120V / 200-240V |
Working Voltage | 16KV (Max DC25KV) |
Trigging voltage | 22KV |
Response Time | <1ms (from input to the output current reaches the nominal value) |
Engraving Depth | 0-4mm |
Frequently Q&A
Installation Steps
Maintaining Suggestion:
|
|
|
---|---|---|
Positive pole:The positive pole is the high-voltage end, connect with the positive terminal of the machine and the inlet water pipe, to feed cooling water in. (Pay more attention to the insulation, especially the high-voltage end, you can wrap with electrical tape a few more turns, or seal with 704 silicon rubber.) |
Negative pole:The negative pole is out of water, connect with the negative terminal of the laser machine. (Make sure that the inlet is lower than the outlet.) |
Easy installation:Wire preconnected: the wires of the two ends, positive pole and negative pole, are connected in advance. Just connect with the wires of your laser machine correspondingly, then make sure the insulation. If any question during installing, feel free to let us know. |
ZnSe Focal Lens | GaAs Focal Lens | Mo Reflective Lens | K9 Gold-Plated Glass Reflective Lens | Laser Power | Upgraded Laser Tube | |
---|---|---|---|---|---|---|
Diameter | 12/15/18/19.05/20/25/25.4mm | 18/19.05/20/25/25.4/28mm | 20/25/30mm | 20/25mm | None | None |
Focal Length | 25.4/38.1/50.8/63.5/76.2/101.6/127/190.5 mm | 50.8/63.5/76.2/101.6/127mm | None | None | None | None |
Wavelength | 10.6um | 10.6um | 10.6um | 10.6um | 10.6um | 10.6μm |
Power | 30W-400W | 100W-600W | 40W-100W | 40W-50W | 40/50/60/80/100/150W | Please refer to Product Details |
Coating | ✓ | ✓ | X | ✓ | ✓ | ✓ |