Feature

●HAND BRAKE OIL BLEEDER TOOL: This vacuum pump testing set can be used as brake bleeding tool on brake and clutch wheel cylinder/caliper, master or slave cylinder. Fit for bike motorcycle car truck pickup, or any other vehicles that use standard brake bleed valves, to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid
●MULTI-FUNCTIONAL VACUUM PUMP: This kit can be widely used for testing vehicles vacuum systems, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition and some others. Few mins after pumping, observe the gauge pointer drop or not, to confirm if there is a leak in the vacuum system. The hand held vacuum pump set also can be used as household kitchen vacuum sealer to seal food jar, ball jar and vacuum bag
●ONE-MAN OPERATION BRAKE BLEEDING: There are 3 sizes brake bleeder valve adapters, choose the closest size to ensure a tight fit, squeeze the handle manually to generate negative pressure in the braking system and then suck out the waste oil and air. Bleed master cylinder first if necessary, then wheel cylinders and calipers in succession, beginning with the wheel closest to the master cylinder and progressing to the one farthest from it. Remember to watch your reservoir level while pumping
●COMPLETE HAND HELD VACUUM PUMP BRAKE BLEED KIT: The kit includes hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case, meets many practical needs. The vacuum pump uses superior materials, such as brass cylinder, rubber covered trigger, with the -30~0inHg gauge and deflate valve located on the upper and lower sides of the cylinder. The 4.5OZ reservoir jar is equipped with liquid transfer and storage lids, easy to use
●SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR vacuum pump test tool and brake bleeder set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the tool fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us for help if overtime


Description

HAND HELD VACUUM PUMP BRAKE BLEED KITHAND HELD VACUUM PUMP BRAKE BLEED KIT

PACKING LIST

  • 1x Vacuum Pump/Brake Bleeder with Vacuum Gauge (-30~0inHg / -760~0mmHg) and Deflate Valve
  • 1x Reservoir Jar with Storage Lid
  • 1x Liquid Transfer Lid
  • 1x Barbed Tee Connector for Hose
  • 1x Barbed Straight Connector for Hose
  • 1x Universal Cup Adapter
  • 2x 20" Transparent Hoses (I.D. 6mm, O.D. 10mm)
  • 2x 4" Transparent Hoses (I.D. 6mm, O.D. 9mm)
  • 2x Tapered Adapters for Hose
  • 3x Brake Bleeder Valve Adapters
  • 1x Instruction
  • 1x Customized Blow Molding Case, 10"L x 8-1/4"W x 3-1/4"H

Easy and quick replacement of brake fluid

useuse

The Vacuum pump Brake bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. Partial list of tests performed with the aid of the Vacuum pump Brake bleeder.

Thanks for Tirras suggestion in the review on August 23, 2020: "Just smear some grease around the base of the bleeder screw. This is usually enough to stop air leakage from around the threads when you crack open the bleeder screw to do the bleeding."

NOTE

1. Please wear gloves and goggles when use.

2. These vacuum pump tester and brake bleeding kit should be used by professional or under the guidance of a professional.

3. Always refer to equipment manufacturers operation instruction, compare to the manufacturers recommended readings.

4. Do not forget the O rings on the jar lid when use.

5. Connect the pump to the liquid transfer lid from "TO PUMP" marked side, and do not invert the reservoir jar when vacuuming. If not, the waste fluid may be sucked into the pump and damage the internal chamber and seals.

6. If there is any leakage on the joint of the vehicle bleeder valve and black suction nipple, please try PTFE, small clamp or something else to seal it.

7. Remember to watch your reservoir level while vacuuming.

8. If the adapters are too hard to connect, try to soak them in hot water for a while.

  • Search B085TGX3KB for Pneumatic Vacuum tool.

Product information