Steps of Using:
Step 1: Switch the meter to the pH/Moisture/Sunlight mode.
Step 2: Insert the meter into the soil about 2-4 inches.
Step 3: Leave it in the soil about 10 minutes and then read the result.
Step 4: Get the meter out of the soil. Clean and dry it.
Kindly Reminders:
1. This soil tester can not be used to test any kind of liquid or artificial light. It will not function properly for testing pH of any liquid.
2. Do not insert the meter into hard or super dry soil as it will damage the sensors of the meter.
3. Do not leave the meter in the soil after using.
4. Use pure water to clean the probes of meter and wipe it dry after each use.
5. Water the soil before testing as the indicator needle might not move if the soil is dry and the readout might not be accurate.