Feature(may vary by option.)

●1.Upgrade Design: Dual mode operation, Power-in, Power-out, and Freewheel operation.
●2.Low Noise Design: running without ratcheting noise; Electric and manual dual model operation, both for in and out.
●3. Enhanced Power Motor Design: 30% higher winching power than regular 6000 lbs trailer winch; Galvanized steel cable and hook for additional safety.
●4.Dynamic Brake as well as Mechanical Friction Brake: CAPACITY 6,000 lbs. rolling; 5,000 lbs. marine; 2,000 lbs. pulling; Max boat weight: 5,000 lbs
●5. Designed for boats up to 6000 lbs.Rocker switch corded remote contro,16 ft. power cord.Best used for car, trailer, truck, trailer winch and boat winch .

[6000lbs]





Description

33
33

2222

Important: When you met above issues in pulling, please don’t directly pull after tighten the clutch.

Designed for boats up to 6000 lbs.

16 ft. power cord. Rocker switch corded remote control.

  • Capacity: 6,000lbs Rolling, 5,000lbs Marine, 2,000lbs Pulling Capacity, Max Boat
  • Weight: 5,000lbs Duty Cycle:Fully Loaded @ 2,000lbs, 6 to 8 minutes operation.
  • Allow 5 minutes to cool before resuming use. Light Load @ 150lbs, 6 to 8 minutes operation.

  • Allow 1 minute to cool before resuming use. Cable Length: 30ft (29ft working length)
  • Power Cable: 16.5’ Mounting Plate: 8-3/4” x 4-15/16” x 5/32” Net Weight: 27lbs Max Boat Size: 18ft Line Speed: 6 Feet/Minute with Load
  • Power Supply: 12 Volts Stall Load: 2,100lbs
  • Current Draw: @150lbs: 4 to 6 amps @2,000lbs: 20 amps Remote Control Cord: 9’9” long Overall Dimensions: 9-1/2” x 7-1/2” x 10”

22

66

77

* Enhanced power motor design, 30% higher winching power than regular 6000 lbs trailer winch.

* Dual directions electric winch. Power-in and power-out.

* Electric and manual dual model operation, both for in and out.

* Dynamic brake as well as mechanical friction brake.

* Low noise design, running without ratcheting noise.

55
88

Cautions: MUST TIGHTEN THE CLUTCH clockwise TO THE END prior to pull. Fail to tighten the clutch may cause .

  1. Pulling force is too low or no pulling force(machine make the sound like gear stripped)
  2. Periodically stop working.
  3. The cable is not locked, will spool out.
  4. Pull for seconds, not working anymore Most of issue you may met in useing this machine could be caused by fail to tighten the clutch.

88

Product information