Feature

●Replaces for Craftsman 536.887993 536.884900 536.886190 536.887.992 536.887994 10Hp 26" 28" Snow Thrower
●Replaces for Craftsman 536.797480 536.772300 536.886260 536.885213 10Hp 26" 28" Snow Thrower
●Replaces for Craftsman 536.887995 536.88110 536.887992 10Hp 26" 28" Snow Thrower
●Package comes with one carburetor, one gasket, two fuel hoses, four clamps, one fuel filter, one primer bulb and one shut off valve

Description

Works with Tecumseh 8hp 9hp 10hp engine

Bore diameter on the front: 23.8mm/0.94

Center to center mounting hole distance on the front: 45.16mm/1.78

Replaces part number 640349 640052 640054 640058 640058A

Replaces Tecumseh HMSK80 HMSK90 HMSK100-159295W HMSK100-159297W HMSK100-159302W LH318SA LH358SA Snow Blower

Bore diameter on the back: 25.95mm/1.02

Center to center mounting hole distance on the back: 35.23mm/1.39

Replaces MFG # 5313 5002 5036

Replaces OREGON 50-659

Replaces STENS 520-926

Replaces John Deere TRX24 TRX26 TRX27 TRX32 TRS22 TRS24 TRS26 TRS27 TRS32 Snow Blower Thrower

This carburetor is pre-adjusted for use. No further adjustments are required before installation.

Please pay special attention to the choke part of your carb. If the choke setup of your current carburetor appears to be different from the one we listed in current listing, you may be looking for other similar models. Check out below chart for comparison and order accordingly.


	Pro Chaser PC210801 Carburetor	Pro Chaser PC210052 Carburetor (model in current listing)	Pro Chaser PC210086 Carburetor	Pro Chaser PC144371 Carburetor	Pro Chaser PC144615 Carburetor
Choke Direction	Auto choke. Turning clock-wise towards the same side of the fuel nozzle with teethed gear/friction stops.	Auto choke with teethed gear/friction stops. Turning clock-wise away from the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened.	Manual handle choke with teethed gear/friction stops. Turning clock-wise away from the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened.	Vertical standup choke with teethed gear/friction stops.	Bent/angled choke handle located to the other side of the fuel nozzle. Turning counter-clockwise towards the fuel nozzle, and stops at a right angle to the fuel nozzle when fully opened.
Replaces Tecumseh Part Number	632107 632107A 640084 640084A 640084B 640105 640299 640299A 640299B	640052 640054 640058 640058A 640349	632552 632557 632557A 632560 632560A 632641 640086 640086A 640092A 640092 640311 640098A	632371 632371A	631070 631070A 631074 631921 631245 631820 632615 632208 632589 632284 640129
Replaces Part Number	Stens 520-902; TORO 38035 38052 38054 38052C 38035C 38056.	MFG 5313 5002 5036; OREGON 50-659; STENS 520-926.			Stens 520-940 056-304, Rotary 13147, MFG 1135 1471 1483.
Compatible Models	Tecumseh HS50 HSK40 HSK50 HSSK40 HSSK50 HSSK55 LH195SA LH195SP OHSK110 OHSK120 OHSK125	Tecumseh LH318SA LH358SA TRX24 TRX26 TRX27 TRX32 TRS22 TRS24 TRS26 TRS27 TRS32	Tecumseh HSK600 HSK635 TH098SA TC-632557 TC-640092 TC-640092A	Tecumseh H50 HSK50 H60 HSK60 H70 HSK70 Snow Thrower Blowers	Tecumseh H25 H30 H35 H40 H50 engine
Adjustable Screws				?	?
Choke with teethed gear/friction stops	?	?	?	?	?
Primer Port	?	?	?	?	?