- Step 1 : Clean the window with a rubber squeegee or low-lint cloth,make sure the surface is clean enough without any dust
- Step 2: Measure and cut film to approprite size,leave an extra inch on each side for late adjustment
|
- Step 3: Spary A LOT OF SOAPY WATER on the glass
- Step 4: Removel back transparent film, wetting the backside of the static film thoroughly with soapy water.
|
- Step 5: Apply the wet side film on the window,use the squeegee to remove extra water and bubbles from the center to the around
- Step 6: Trim off the margins with knife, wipe out surface water with a lint-free towel.
|
Helpful Tips: - Please cut the film extra inch on each side will be more easy for adjustment .P
- lease spary more soapy water on both side glass and film. F
- or large windows,we recommend two person to complete the installtion.P
- lease dont use on forested glass , art glass, vehicle windows.
|