Feature

●Applicable To :all models of mobile phones, pads and computers headphone jack, is built to easily remove broken 3.5mm headphone plugs from jacks.
●Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
●Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough.
●Tep: This set of headphone jack remover tool is considered a single-use tool.
●If you have any question, please feel free to contact us by email. You dont need to return the product, we can give you a full refund.


Description

Installation steps： Step 1.Insert tool between headphone jack housing and broken plug. You may need to lightly tap it in. Step 2.Pinch with fingers or pliers for better grip. Step 3.With broken plug enclosed, Then tighten the end of the tube with hands or pliers and pull to remove . Step 4. If the broken plug is not all taken out, proceed with the other one, the headphone jack remover. Use the same method as above. USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool. Package Contents: 4 x headphone jack remover . 1 x headphone hole cleaning brush. 2 x Protect finger cots NOTE:​ Depending on how the headphone plug was broken off in the device, it may not be possible to be removed without disassembling the device and therefore the steel tube would not work in thats ituation. Also, please note that the jack connectors inside your device may have been