Feature

●【MATERIAL】The oil catch can is made of high quality T6061 aluminum for enhanced strength and durability, red anodized finish body presents a fashion appearance.
●【PACKAGE】1 x Oil Catch Tank; 2 x Barb Fitting; 1 x Oil Catch Tank Hose; 1 x Vacuum Pressure Gauge; 4 x Flanged Screws; 4 x Flanged Nut; 4 x Small Pipe Clamp; 1 x Large Pipe Clamp.
●【FILTRATION】Oil Filtered Tank can trap oil while allowing air to escape freely, and the baffle system in the oil tank also could filter the air inorder to reduce oil and gas into the intake manifold.
●【PROTECTION】The baffle system in the tank could catch the oil and moisture from PCV/CCV air, preventing misfires due to carbon accumulation, keeping engine clean and prolongs engine life.
●【APPLICATION】Universal fitments fit for most cars as long as it has enough space; Ensuring better mileage, better performance and preserve engine life. Professional installer is highly recommended.


Description

2700-22700-2

Modengzhe AutoModengzhe Auto
Welcome to Modengzhe & Enjoy your shopping

  • We are committed to providing you with good quality auto parts.
  • We sell kinds of brand new automotive parts, but please notice these are Non-OEM product, accessory only.
  • No instructions included, prefessional installation is highly recommended, thank you for your understanding.

Modengzhe 450ML Engine Oil Breather Tank

Product Specifications

  • Capacity: 450ML
  • Tank Net Weight: 20.4oz
  • Tank Height: 180mm/7.08"
  • Tank Diameter: 63mm / 2.48"
  • Guage Thread Dia.: 10mm / 0.39"
  • Pressure Gauge: 1.61" x 1.65" (H*Max.D)
  • Barb Fitting Inner Dia.: 3mm/0.12"
  • Oil Catch Tank Net Weight: 20.4oz

  • Product Functions
  • Collect steam in the crankcase
  • Reduce the amount of steam entering the intake manifold
  • Reduce the probability of secondary combustion
  • Reduce carbon deposits and protect the engine
Main ImageMain Image

Product Working Principles & Product Operation Notes

  • An oil catch tank can be used in turbo applications, or high-performance racing applications where excessive blow-by (leakage past the piston rings) of air and fuel vapor occurs, which creates a positive pressure in the crankcase.
  • During engine operation, blow-by gases, as well as oil mist from the rotating components of the engine, pass through the PCV valve and are routed back into the intake for the engine to burn off. However, some of the oil mist and other by-products settle along the engine intake and over time form a gunk.
  • The oil mist and other byproducts precipitate in the engines intake, forming a sticky substance over time. The oil recovery tank collects the oil mist, condenses the fuel vapor,at the same time allow cleaner gas to return to the inlet.
  • Installation Notes: Before installation, be sure to choose the installation location. Since the engine will emit heat while working, try to install the oil breather pot as far away from the heat source as possible to facilitate the cleaning of the oil-water mixture in the oil breather pot in the future. When connecting, it must be fixed with clamps, and try to keep the entire pipeline in a vacuum state.
  • Other Note: No instructions included, professional installation is highly recommended; Please check the size chart carefully before ordering; Please allow 1-5mm difference due to the manual measurement; The color of the actual items may slightly different from the listed image due to different computer screen.

B08Q82Y77B B08Q7QH5D3 B094D9FLQM
B08Q82Y77B B08Q7QH5D3 B094D9FLQM You are viewing this product
Volume 27oz 5oz 10oz 15oz
Material Aluminum Aluminum Aluminum Aluminum
Pressure Gauge No No No ?

Product information