Feature
●【Various Specifications】The electrical terminals kit include 240pcs 3 different sizes heat shrink crimp connectors(20pcs yellow wire range 12-10 AWG, 100pcs blue wire range 16-14 AWG, 120pcs pink wire range 22-18AWG), Shrinking Ratio: 3:1.
●【Waterproof】Unique Dual-walled Design: Polyolefin tubing outside and hot melt adhesive inside. When heat is applied, polyolefin tubing reduces in size and adhesive flows inside the insulation, creating waterproof seal and preventing wire corrosion, provides a IP67 waterproof seal.
●【Conveniently Identify & Storage】This waterproof wire connectors set come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application.
●【Widely Used】This heat shrink kit can be greatly used for Motorcycle, Automotive, Marine and other Home Applications. Its recommended to use a hot air gun with reflector nozzle for best results.
●【Quality Service Guarantee】If you are not satisfied with the purchase, please contact us. We will communicate with you in time and provide you with satisfactory solutions, 100% satisfaction guarantee, risk-free shopping!
Description
KOOWIN 240 PCS Heat Shrink Butt Connectors
Specifications
Shrink ratio 3:1
Operating Temperature : -55℃～125℃
Minimum shrink temperature : 80˚C
Minimum fully recovery temperature : 130˚C
Size:
110 x Red Heat Shrink Butt Connectors : Suits cable / wire sizes 22-18AWG / 0.5-1.5mm²
100 x Blue Heat Shrink Butt Connectors: Suits cable / wire sizes 16-14AWG / 1.5-2.5mm²
30 x Yellow Heat Shrink Butt Connectors: Suits cable / wire sizes 12-10AWG / 4.0-6.0mm²
|
|
|
|
|
|---|---|---|---|
|
Polyolefin tube on the outside, hot melt adhesive on the inside, Shrinking Ratio: 3:1. |
3 sizes and 3 colors, 20 pcs yellow, 100 pcs blue, 120 pcs pink, 240 pcs in total. |
The waterproof effect is very good, IP67 waterproof, you can use it with confidence. |
Heat shrink butt connectors can be used for wiring to meet your daily needs. |
|
|
|
|
|
|---|---|---|---|
|
1.Choose a suitable connector, strip the wire insulation by 8 mm then insert it into the connector. |
2. Crimp the metal part by plier. |
3. To heat the connector while rotating, the best option is to use a heat gun. |
4. After the terminal to cool down then inspect your connection. |
