Feature

●Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating.
●Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube.
●3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the air conditioner installation and vehicle repair.
●Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and thin walled aluminum tubes. High quality steel material ensures strong strength and long durability. All of these tools are packed in a carry case for easy storage and transportation.
●Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and prevent skipping and jumping while cutting.

[Red]





Description

11

Brake Pipe Flaring Tool Kit Line Plumbing With Aluminum 3-In-1 180 Degree Tubing Bender Cutter Promotion

Flaring Tool Kit Come With Pipe Clamp, Screw-Type Spreader, 7 Double Flare Dies Tube Cutter Is a Special Tool For Cutting Tube And Improve Work Efficiency

Ideal For: Automotive, Plumbing and Electrical Work

material: metal

Color: Photo Color

Tubing Bender Length:10.2 inch

Case Size:13 x 5.5 x 1.5 inch (L x W x H)

Item: Tubing Cutter Flaring Bender Tool Kit

Design: 3-In-1

Adjust Degree: 180 Degree

Diameter Range: 1/4 inch, 5/16 inch, 3/8 inch

Flaring Dies: 3/16 inch - 5/8 inch

22

1. Self-Centering Yoke X 1

2. Tube Cutting（1/8"-1 1/8"）X 1

3. 6-Hole Bar（1/8", 3/16", 1/4", 5/16", 3/8", 7/16"）X 1

4. Flare Dies Size: 1/2inch, 6mm, 4.75mm, 5mm, 1/4inch, 8mm, 10mm

5. 3 in 1 pipe bender /copper pipe bender (1/4″, 5/16″, 3/8″）

33

Instruction:

1. Clean the tube end.

2. Insert the tube from bottom of the clamp until the edge get even on the top.

3. Slide the ratchet cone into the clamp and line the to the mark.

4. Tighten the side T bar.

5. Turn the cone driving screw down until you hear the clutch click.

6. Loose the cone driving screw and side T bar. Remove from the clamp. And take the tube off.

Usage: Cutting Soft Copper, Brass, Steel, Aluminum Tubing

Package Content: 1 x Tubing Bender, 1 x Flaring Tool, 1x Pipe Cutter ,7 x Flaring Dies, 1 x Case

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

44

3 in 1 Pipe Bender: Material: Aluminum alloy

Model: CT-369 (180 degrees)

Size: CT-369A: 1/4″, 5/16″, 3/8″

55

Pipe Cutter : Tubing Cutter,Cutting (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube

Double Flaring Tool Kit:

Model: CT-2026A/CT-2026M

Size: CT-2026A: CT-2027A + 7 tops (3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8")

Uses: for copper pipe, aluminum pipe, iron pipe or other pipes, for expanding the bell mouth

Product information