SPECS: M14x1.5 thread - Closed End Bulge Acorn Spline Style Lug Nuts - Conical 60 Degree Seat - 2 inch(50.8mm) long - 23mm wide.
FITS: Vehicles with wheel studs requiring an M14x1.5 thread and wheels that take a conical 60 degree seat.
VERIFY FITMENT: By matching this lugs specs (thread, seating style, hex, etc.) to match both your vehicle and wheel requirements. Or contact our Customer Experience Team to verify a safe and proper fitment.
INCLUDES: 24 Black Closed End Bulge Acorn Spline Lug Nuts with 1 Socket Key.
Fitment:
Buick: 08-14 Enclave.
07-13 Avalanche, 02-06 Avalanche 1500, 15-18 Colorado, 03-14 Express 1500, 88-99 K1500, 93-99 K1500 Suburban, 99-18 Silverado 1500, 00-11 Suburban 1500, 95-18 Tahoe, 09-19 Traverse.
15-19 Expedition, 15-19 F-150.
GMC: 07-15 Acadia, 15-18 Canyon, 88-99 K1500, 93-99 K1500 Suburban, 03-14 Savana 1500, 07-18 Sierra 1500, 92-18 Yukon, 00-13 Yukon XL 1500.
Lincoln: 15-19 Navigator.
Ram: 19-20 1500
The above shows only some models, if you have any problem, contact our Customer Experience Team to verify a safe and proper fitment.
Installation Instructions:
1. Make sure wheel studs are clean and tight. Replace or tighten a problem stud.
2. Ensure the wheel is flat against the mounting surface with studs through each hole.
3. All nuts should be hand started and then secured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicle owners manual or wheel manufacturers guide for proper torque specifications. 14mm inch Lug size should use 85-90 torque.
4. Check and retighten all nuts after 25 miles of driving and again after 50 miles, until wheel nut torque remains unchanged.