This 1-1/4-Inch coarse thread, 2 square drive washer head screw works well in 3/4-Inch thick, so Feeter material. The washer head of this screw is our most popular head style as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in so Feeter material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. Our screws have a Zinc finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance. For maximum rust resistance, look to our Sun-Seal coated weather resistant screws.
The Kreg 1-1/4-Inch #8 Coarse Pocket Screws feature Maxi-loc washer heads and come in a 5,000-pack. The washer head of this screw sports a wide load-bearing surface and will not overdrive into the bottom of the pocket. This is an especially useful feature when working in softer materials such as plywood and composites. The screws also feature a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. The screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. The screws have a zinc finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance. The screws come backed with a manufacturers limited 30-day warranty.