Feature
●100% mppt charge controller 60 amp and Die-casting aluminum design
●Max Input Current: 60 amp; Rate Input Solar Power: 780W(12V); 1560W(24V); 2340W(36V); 3120W(48V)(The maximum input power must not exceed 1.5 times the rated power ); Max input Voltage: 150V; Auto control system to limit the charging power & current go over the rated value.Common NEGATIVE Ground and TROUBLESHOOTING function( fault LED indicator).
●60A Mppt Charge Controller support for 4 type Battery charging : Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (user couldn’t set Lithium). Battery temperature compensation function to ensure the controller’s life.(The PV input voltage must be at least 2V greater than the battery voltage to charge )
●RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
[50A]
[100A]
[60A]
Description
FEATUREs
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can ensure very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency,corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point(MPP) of PV array to obtain the maximum energy of the panel. The load, utility or generator auto-control relays make it easy to compose the hybrid power system.
- So that can be widely used for various applications, e.g.solar RV, household system and field monitoring, etc.
- Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5% and will minimize the MPP loss rate and loss time, Maximum DC/DC transfer efficiency is as high as 98.6% , full load efficiency is up to 98%
- The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP.
- Auto control system to limit the charging power & current go over the rated value. Battery temperature compensation function and Automatic over-temperature power reduction function will prolong your battery life.
- Real-time energy recording and statistical function. One key to zero clearing PV energy function.
- Error LED indicator tell you whats wrong with your system.
- Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
- To monitor or set the parameters by using the phone Apps or PC software.
- WARNING: Do not reverse the polarity of the batteries. Reverse polarity will damage the charge controller permanently！！！
MORE CONVENIENT AND SAFE DESIGN
|
|
|
|
|
|---|---|---|---|
ELECTRONIC PROTECTION
|
CERTIFICATION
|
COMMON NEGATIVE
|
ACCESSORIES
|
DIAGRAM OF CONNECTION
TIPS
- Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage.
- DO NOT connect any Inverter / wind / Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
- Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. the charging current almost be zero when controller is floating charge.
- Parameter Setting Rules: Floating voltage > Low voltage reconnect > Low voltage discharge.
- The solar controller will stop output when the battery under 10.7V (adjustable).The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
- Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment.
- Remove all the debris around the controller(leaving a space of approx. 5.91in)
- WARNING: Do not reverse the polarity of the batteries. Reverse polarity will damage the charge controller permanently！！！
